Description
📅 The average delivery time for this item within the EU is approximately 10 – 14 working days.
LED coil
PNI LED 2000 brings an innovative element to the field of CB antennas: the antenna coil lights up when the station is transmitting. The higher the transmission power, the greater the light intensity of the LED.
Performance
The performance of the PNI LED 2000 antenna is closely linked to the technical characteristics of the antenna under ideal installation and use conditions: SWR < 1.2:1, maximum applied power 500 W, impedance 52 Ohms, stainless steel, etc.
Communication distance
Communication distance is another decisive factor when choosing a CB antenna. Thus, the maximum communication distance of 10 km is achieved under ideal working conditions: calibrated antenna, open field without obstacles, station with maximum legally permitted power of 4W and standard reception. Any obstacle such as hills, mountains, or buildings can reduce this distance.
Length
The length of the antenna is another important factor that can influence the communication distance. Thus, the longer the antenna, the greater the range. The PNI LED 2000 has a length of 90 cm (coil + spike).
Required accessories
To use the PNI LED 2000 antenna, you need:
– a PL magnetic base with a cable long enough to mount the antenna on the car roof and a PL259 plug to connect the antenna to the CB station.
– or a fixed mount installed on a car/truck with a mount and connection cable to the station, such asthe PNI T601 connection cable.
Video presentation | |
CB PNI LED 2000 antenna with SO 239 thread, length 90 cm, 26 28 MHz, 500 Watt, illuminates during |
Technical characteristics
| Product Identification | |
| Product code | PNI-LED20-BM |
| Work Tape | CB |
| Product color (spike) | Silver |
| Coil color | Black |
| General characteristics | |
| Working frequency | 26 – 28 Mhz |
| Maximum applied power | 500W |
| Minimum S.W.R. in the center of the band | less than 1.2:1 |
| Length | Ear length: 750 mm Antenna length: 900 mm |
| Impedance | 50 Ohm |
| Material | Stainless steel |
| Connector Type | PL |
| Cable length | 4m |
| Weight | 1201 g |
| Dimensions | Antenna: 44 x 44 x 900 mm Magnetic base: 145 x 145 x 60 mm |
| Working distance | 10 km |
| Magnetic base | Yes, 145 mm |
| Operating temperature | -26°C ~ +80°C |
| The package contains | |
| Radio Station Antenna | Yes |
| RG58 Cable | Yes, 4 m |
| PL259 Plug | Yes |
| Magnetic base | 145 mm |
Documentation
Videos
This post is also available in: Italiano (Italian)
