Description
📅 The average delivery time for this item within the EU is approximately 10 – 14 working days.
PNI-KAP-800 – PNI AP800D gate automation kit includes motor, photocells, remote control, lamp, 230V develops 1100 N and 800KG sliding gate
Motor for automatic swing gates
The motor has a power of 350W and can open or close gates with a maximum weight of 800 kg.
The PNI AP800D gate automation kit, which includes this motor, contains all the components necessary to automate a self-supporting gate: the motor, warning light, two photocells and mounting accessories.
Local and remote control
The gate can be opened and closed remotely (2 remote controls included) or other access control devices can be connected such as access buttons, access keypads, card readers, smart relays with internet control, etc.
Obstacle detection and incident prevention
To avoid incidents, you can set the obstacle detection sensitivity level: from low to high. If the gate is closing or opening and encounters an obstacle, the motor will stop.
Also, the set of photocells included in the package detects any obstacle that appears or is present in the gate opening and automatically stops the motor, respectively the closing of the gate.
Automatic shutdown
You can program the gate to close automatically after a certain number of seconds (10, 30 or 60). You can also program the condominium mode that allows simultaneous control from multiple access devices.
In condominium mode, when the gate is opening, if the buttons on the remote control or other connected access terminal (access button or access keypad) are pressed, they will not work until the gate is fully open. When the gate is closing, if the buttons on the remote control or other connected access terminal are pressed, the gate will stop and open fully, allowing access.
Installation precautions
Do not perform welding when:
– it is mounted on the bearing sets (the bearing contact is damaged);
– the engine is mounted (it leads to the failure of the board and the wiring on it).
Technical characteristics
PNI-KAP-800 – PNI AP800D gate automation kit includes motor, photocells, remote control, lamp, 230V develops 1100 N and 800KG sliding gate | |
|---|---|
| Package contents | |
| User manual | Yes |
| Motor | Yes |
| Lamp | Yes |
| Photocells | Yes, 2 pcs. |
| Remote control | Yes, 2 pcs. |
| pier | Yes, 2 pieces |
| Mounting accessories | Yes |
| Engine features | |
| feeding | 230 |
| Power | 350W |
| Maximum door weight | 1300 kg |
| Opening/closing speed | 12 m/min |
| Limit noise | ≤55dBa |
| Weatherproof | Yes |
| Integrated control panel | Yes |
| Pinion module | I-4 |
| Remote control features | |
| Battery | Alkaline, 23A, 8V |
| Communication distance | Up to 50m |
| Frequency | 433MHz |
| Lamp features | |
| feeding | 12-265V |
| Power | 1.5W |
| size | 90 x 80 x 140 mm |
| Photocell features | |
| feeding | 12 / 24V |
| Communication distance | Up to 10 m |
| size | 75 x 30 x 50 mm |
| Wheel features | |
| Wheel diameter | 680mm |
| Distance between wheels | 740mm |
PNI-CRP130 – PNI CRP130 1m metal rack for self-supporting gate automation | |
|---|---|
| Yala Features | |
| Material | Stainless steel |
| Package contents | |
| rack | Yes, 1 pc. (1 m) |
| Rack features | |
| Length | 1m |
| Material | Steel |
| Rail features | |
| size | 1050 X 30 X 8 mm |
| Material | |
Videos
This post is also available in: Italiano (Italian)
