Economy pack – 25 pieces Ionicore cartridges 10″ – 5 micron melt blown polypropylene

Economy pack - 25 pieces Ionicore cartridges 10″ - 5 micron melt blown polypropylene

Filters are manufactured with 100% food-grade pure polypropylene fibers fused and woven without the use of chemical glues.
Ideal replacement filter.

They reduce sediments, rust and other suspended impurities. The fibers have been carefully spun together to form a true gradient density from the outer to the inner surface. The result is high sediments hold back capacity and a higher efficiency than normal melt-blown polypropylene filters. They will not release taste, odor, or color to the liquid being filtered when used within the recommended temperature limit. Additionally, polypropylene construction provides superior chemical resistance. Ideal for a wide variety of food and beverage or industrial filtrations.

Application:
– Food and beverage.
– Bottled water production.
– Household water dispenser, water purification systems.
– Commercial water purification systems, drinking water systems, reverse osmosis filters (RO systems).

Compatible / recommended for systems: Aquaphor RO, Aquaphor Trio +, Atoll 450 – 460 – 560, Depuragua, Honeywell and similar filtration systems.

Autonomy: When completely dirty – 3, Max. 6 months
Flow rate: 3.5 gpm (13.3L / min)
Pressure: 87psi (6bar) max.
Max differential pressure: 5 bar (500 kpa) at 21 ° C
Operating temperature: 39.2 – 174 ° F (4 – 79 ° C)
Efficiency: 95%
Dimensions: 10 “x 2-1 / 2” (Inch) / 254 x 63 (mm.)
Core inside diameter: 1.102 “(Inch) / 28 (mm.)

Plastic packaging
Fast delivery from Italy.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system.
Nota bene: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.

Please follow and like us:

Economy pack – 10 pieces Ionicore cartridges 10″ – 5 micron melt blown polypropylene

Ionicore Melt blown polypropylene cartridge 10 inch - 5 micron PPS

Filters are manufactured with 100% food-grade pure polypropylene fibers fused and woven without the use of chemical glues.
Ideal replacement filter.

They reduce sediments, rust and other suspended impurities. The fibers have been carefully spun together to form a true gradient density from the outer to the inner surface. The result is high sediments hold back capacity and a higher efficiency than normal melt-blown polypropylene filters. They will not release taste, odor, or color to the liquid being filtered when used within the recommended temperature limit. Additionally, polypropylene construction provides superior chemical resistance. Ideal for a wide variety of food and beverage or industrial filtrations.

Application:
– Food and beverage.
– Bottled water production.
– Household water dispenser, water purification systems.
– Commercial water purification systems, drinking water systems, reverse osmosis filters (RO systems).

Compatible / recommended for systems: Aquaphor RO, Aquaphor Trio +, Atoll 450 – 460 – 560, Depuragua, Honeywell and similar filtration systems.

Autonomy: When completely dirty – 3, Max. 6 months
Flow rate: 3.5 gpm (13.3L / min)
Pressure: 87psi (6bar) max.
Max differential pressure: 5 bar (500 kpa) at 21 ° C
Operating temperature: 39.2 – 174 ° F (4 – 79 ° C)
Efficiency: 95%
Dimensions: 10 “x 2-1 / 2” (Inch) / 254 x 63 (mm.)
Core inside diameter: 1.102 “(Inch) / 28 (mm.)

Plastic packaging
Fast delivery from Italy.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system.
Nota bene: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.

Please follow and like us:

Economy pack – 4 pieces Ionicore cartridges 10″ – 5 micron melt blown polypropylene

Economy pack - 4 pieces Ionicore cartridges 10″ - 5 micron melt blown

Filters are manufactured with 100% food-grade pure polypropylene fibers fused and woven without the use of chemical glues.
Ideal replacement filter.

They reduce sediments, rust and other suspended impurities. The fibers have been carefully spun together to form a true gradient density from the outer to the inner surface. The result is high sediments hold back capacity and a higher efficiency than normal melt-blown polypropylene filters. They will not release taste, odor, or color to the liquid being filtered when used within the recommended temperature limit. Additionally, polypropylene construction provides superior chemical resistance. Ideal for a wide variety of food and beverage or industrial filtrations.

Application:
– Food and beverage.
– Bottled water production.
– Household water dispenser, water purification systems.
– Commercial water purification systems, drinking water systems, reverse osmosis filters (RO systems).

Compatible / recommended for systems: Aquaphor RO, Aquaphor Trio +, Atoll 450 – 460 – 560, Depuragua, Honeywell and similar filtration systems.

Autonomy: When completely dirty – 3, Max. 6 months
Flow rate: 3.5 gpm (13.3L / min)
Pressure: 87psi (6bar) max.
Max differential pressure: 5 bar (500 kpa) at 21 ° C
Operating temperature: 39.2 – 174 ° F (4 – 79 ° C)
Efficiency: 95%
Dimensions: 10 “x 2-1 / 2” (Inch) / 254 x 63 (mm.)
Core inside diameter: 1.102 “(Inch) / 28 (mm.)

Plastic packaging
Fast delivery from Italy.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system.
Nota bene: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.

Please follow and like us:

Ionicore 2.5 x 10 inch SL Carbon Block 5 Micron for Water Purifier, Under-counter Osmosis Systems and Under-Sink Filters 10 Inch

CTO (Carbon Block Filter, CFB) - 5 Micron natural activated carbon cartridge (CAB technology), capable of removing organic substances, chlorine and pesticides. Absorption Filter type.

CTO (Carbon Block Filter, CFB) – 5 Micron natural activated carbon cartridge (CAB technology), capable of removing organic substances, chlorine and pesticides. Absorption Filter type.
Extended capacity (up to 6 months).

The original and classic solution for all versions with 10 inch containers of any brand.

Recommended for / compatible with: Aquaphor RO, Aquaphor Trio +, Atoll 450 – 460 – 560, Depuragua, Geyser, Honeywell, NATURE WATER PROFESSIONALS and similar.

Fits both accumulation-type and continuous cycle purification systems.
CTO (Chlorine, Taste, and Odor) Carbon Block Filter – 5 Micron natural activated carbon cartridge (CAB technology), capable of removing organic substances, chlorine, benzene ether, DDT, aromatic compounds and carbamate pesticides. It eliminates the bad odor and unpleasant taste of water. Dimensions: 2.8 x 10 inch ( 7 x 25 cm).

Please follow and like us:

Set of 3 Filters 2.5 x 10 inch SL (PP 5 Micron + Softening Cartridge B510-04 + Carbon Block 5 Micron) for Aquaphor Trio Norma Softening, Water Purifier, Under-counter and Under-Sink Filters 10 Inch

Set Replaceble Water Filters Aquaphor Trio Norma Softening - Polipropilene Carbon Block 5 microns

Kit of 3 replacement sediment filters (replaceable cartridges) – set 3 filters 2.5×10 ” Slim Line (SL) (PP 5 Micron + Softening Cartridge B510-04 + Carbon Block 5 Micron) for water purifiers, and in-line 10-inch under-counter kitchen filters – for hard water.

The gradient fabric with alternating porosity offers greater capacity and longer life.

1) Melt-blown filter cartridges are made of fused and intertwined food-grade polypropylene fiber without the use of chemical glues. It can effectively remove suspended substances, particulate, rust and other contaminants from liquids, providing efficient filtration and long service life. Mechanical filter type.
2) Aquaphor B510-04 softening cartridge softens the water, solving the problem of scaling and flaking in boiled water. It can be regenerated at home.
3) CTO (Carbon Block Filter) – 5 Micron coconut natural activated carbon cartridge (CFB technology), capable of removing organic substances, chlorine and pesticides, as well as the bad odor and unpleasant taste of water. Only natural carbon of vegetable origin. Absorption Filter type. Ultra fine.

Extended capacity (up to 6 months).

Kit of 3 replacement filters for reverse osmosis water purifiers and in-line under-sink filters. The original and classic solution for all versions with 10 inch containers of any brand.

Recommended for / compatible with: Aquaphor RO, Aquaphor Trio + softening, Aquaphor Trio Norma softening, Atoll, Depuragua, Geyser, Honeywell, NATURE WATER PROFESSIONALS and similar.

Fits both accumulation-type and continuous cycle purification systems.
1st filter: PP 5 Micron sediment cartridge: removes sand, rust, and suspended particles. Dimensions: 2.4 x 10 inch ( 6 x 25 cm).
2nd filter: Aquaphor B510-04 softening cartridge softens the water, solving the problem of scaling and flaking in boiled water. It can be regenerated at home.
3rd filter: CTO (Chlorine, Taste, and Odor) Carbon Block Filter – 5 Micron natural coconut shells activated carbon cartridge (CFB technology), capable of removing organic substances, chlorine, benzene ether, DDT, aromatic compounds and carbamate pesticides. It eliminates the bad odor and unpleasant taste of water. Dimensions: 2.8 x 10 inch ( 7 x 25 cm).

Please follow and like us:

Set of 3 Filters 2.5 x 10 inch SL (PP 5 Micron + Carbon Block 5 Micron + Carbon Block 1 Micron) for Aquaphor Trio Norma, Water Purifier, Under-counter Osmosis Systems and Under-Sink Filters 10 Inch

Set Replaceble Water Filters Aquaphor Trio Norma - Polipropilene Carbon Block 5 microns

Kit of 3 replacement sediment filters – set 3 filters 2.5×10 ” Slim Line (SL) (PP 5 Micron + Carbon Block 5 Micron + Carbon Block 1 Micron) for water purifier, under-counter reverse osmosis (RO) systems and in-line 10-inch under-counter kitchen filters

The gradient fabric with alternating porosity offers greater capacity and longer life.

1) Melt-blown filter cartridges are made of fused and intertwined food-grade polypropylene fiber without the use of chemical glues. It can effectively remove suspended substances, particulate, rust and other contaminants from liquids, providing efficient filtration and long service life. Mechanical filter type.
2) CTO (Carbon Block Filter) – 5 Micron coconut natural activated carbon cartridge (CFB technology), capable of removing organic substances, chlorine and pesticides. Absorption Filter type.
3) CTO (Carbon Block Filter) – 1 Micron coconut natural activated carbon cartridge (CFB technology), capable of removing organic substances, chlorine and pesticides, as well as the bad odor and unpleasant taste of water. Only natural carbon of vegetable origin. Absorption Filter type. Ultra fine.

Extended capacity (up to 6 months).

Kit of 3 replacement filters for reverse osmosis water purifiers and in-line under-sink filters. The original and classic solution for all versions with 10 inch containers of any brand.

Recommended for / compatible with: Aquaphor RO, Aquaphor Trio +, Aquaphor Trio Norma, Atoll 450 – 460 – 560, Depuragua, Geyser, Honeywell, NATURE WATER PROFESSIONALS and similar.

Fits both accumulation-type and continuous cycle purification systems.
1st filter: PP 5 Micron sediment cartridge: removes sand, rust, and suspended particles. Dimensions: 2.4 x 10 inch ( 6 x 25 cm).
2nd filter: CTO (Chlorine, Taste, and Odor) Carbon Block Filter – 5 Micron natural coconut shells activated carbon cartridge (CFB technology), capable of removing organic substances, chlorine, benzene ether, DDT, aromatic compounds and carbamate pesticides. It eliminates the bad odor and unpleasant taste of water. Dimensions: 2.8 x 10 inch ( 7 x 25 cm).
3rd filter: CTO (Chlorine, Taste, and Odor) Carbon Block Filter – 1 Micron natural coconut shells activated carbon cartridge (CFB technology), capable of removing organic substances, chlorine, benzene ether, DDT, aromatic compounds and carbamate pesticides. It eliminates the bad odor and unpleasant taste of water. Dimensions: 2.8 x 10 inch ( 7 x 25 cm).

Please follow and like us:

Ionicore melt blown polypropylene water filter cartridge 10 inch drop-in 5 micron

Ionicore Melt blown polypropylene cartridge 10 inch - 5 micron PPS

Filters are manufactured with 100% food-grade pure polypropylene fibers fused and woven without the use of chemical glues.
Ideal replacement filter.

They reduce sediments, rust and other suspended impurities. The fibers have been carefully spun together to form a true gradient density from the outer to the inner surface. The result is high sediments hold back capacity and a higher efficiency than normal melt-blown polypropylene filters. They will not release taste, odor, or color to the liquid being filtered when used within the recommended temperature limit. Additionally, polypropylene construction provides superior chemical resistance. Ideal for a wide variety of food and beverage or industrial filtrations.

Application:
– Food and beverage.
– Bottled water production.
– Household water dispenser, water purification systems.
– Commercial water purification systems, drinking water systems, reverse osmosis filters (RO systems).

Compatible / recommended for systems: Aquaphor RO, Aquaphor Trio +, Atoll 450 – 460 – 560, Depuragua, Honeywell and similar filtration systems.

Autonomy: When completely dirty – 3, Max. 6 months
Flow rate: 3.5 gpm (13.3L / min)
Pressure: 87psi (6bar) max.
Max differential pressure: 5 bar (500 kpa) at 21 ° C
Operating temperature: 39.2 – 174 ° F (4 – 79 ° C)
Efficiency: 95%
Dimensions: 10 “x 2-1 / 2” (Inch) / 254 x 63 (mm.)
Core inside diameter: 1.102 “(Inch) / 28 (mm.)

Plastic packaging
Fast delivery from Italy.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system.
Nota bene: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.

Please follow and like us:

InLine Active Carbon Block Postfilter for Reverse osmosis, under-sink filters, ice-makers, refrigerators 1/4″ FPT 2,5″x11″ – 5 micron

InLine Active Carbon Block Postfilter for Reverse osmosis, under-sink filters, ice-makers, refrigerators 1/4" FPT 2,5"x11" - 5 micron

Inline post filter is composed of coconut organic carbon and improves water as a last step of a compact osmosis system or refrigerator. CTO (Carbon Block Filter) – 5 Micron coconut natural activated carbon cartridge, capable of removing organic substances, chlorine and pesticides.

Post-filter T33 for reverse osmosis, ice makers, refrigerators, different filters.
Clean drinking water; Improvement of taste and odor effects.
Natural coconut active carbon (CB).
Use position: final level water purifier.
Filter Measurements: InLine 2,5 x 11 inches.
1/4″ FPT thread.

Cartridge in sintered activated carbon for reverse osmosis and water purifier.
The carbon block TYPE. This type of cartridge consists of a particular mixture of activated carbon and molecular polymers, pressed and sintered capable of retaining by itself most of the chemical pollutants present in the water, such as: CHLORINE, PESTICIDES, HERBICIDES, CHLORINATED SOLVENTS, ATRAZINE, MOLINATE, BENTAZONE, ORGANIC SUBSTANCES, UNPLEASANT TASTES AND SMELLS.
The special chemical-physical manufacturing process of the cartridges allows for SMOOTH FILTRATION EXTERNAL SURFACES to be obtained, capable of RETAINING THE SOLID IMPURITIES present in the water. The filter cartridges produced in this way turn out to be a homogeneous block, very resistant, with remarkable and important absorption capacities.

Technical features:
Max flow rate: 2.8lpm *
Max pressure: 8bar *
Max temperature: 38 ° C. *
Autonomy: 9,500 liters.

Compatible / recommended for systems: Aquaphor RO, Aquaphor Trio +, Atoll 450 – 460 – 560, Depuragua, HoneyWell and similar filtration systems.

Plastic packaging

 

Please follow and like us:

Ionicore Set of 3 Filters 2.5 x 10 inch SL (PP 5 Micron + GAC Filter + Carbon Block 5 Micron) for Water Purifier, Under-counter Osmosis Systems and Under-Sink Filters 10 Inch

Set of replacement filters IONICORE for a wide range of standard reverse osmosis systems

Kit of 3 replacement sediment filters – set 3 filters 2.5×10 ” Slim Line (SL) (PP 5 Micron + GAC Filter + Carbon Block 5 Micron) for water purifier, under-counter reverse osmosis (RO) systems and in-line 10-inch under-counter kitchen filters

The gradient fabric with alternating porosity offers greater capacity and longer life.
GAC (Granulated Active Carbon) technology effectively removes organic substances, chlorine and pesticides, as well as the bad odor and unpleasant taste of water. Only natural carbon of vegetable origin. Absorption Filter type.
Melt-blown filter cartridges are made of fused and intertwined food-grade polypropylene fiber without the use of chemical glues. It can effectively remove suspended substances, particulate, rust and other contaminants from liquids, providing efficient filtration and long service life. Mechanical filter type.
CTO (Carbon Block Filter) – 5 Micron coconut natural activated carbon cartridge (CCAB technology), capable of removing organic substances, chlorine and pesticides. Absorption Filter type.
Extended capacity (up to 6 months).

Kit of 3 replacement filters for reverse osmosis water purifiers and in-line under-sink filters. The original and classic solution for all versions with 10 inch containers of any brand.

Recommended for / compatible with: Aquaphor RO, Aquaphor Trio +, Atoll 450 – 460 – 560, Depuragua, Geyser, Honeywell, NATURE WATER PROFESSIONALS and similar.

Fits both accumulation-type and continuous cycle purification systems.
1st filter: PP 5 Micron sediment cartridge: removes sand, rust, and suspended particles. Dimensions: 2.4 x 10 inch ( 6 x 25 cm).
2nd filter: GAC (Granulated Active Carbon) technology effectively removes organic substances, chlorine and pesticides, as well as the bad odor and unpleasant taste of water. Dimensions: 2.8 x 10 inch ( 7 x 25 cm).
3rd filter: CTO (Chlorine, Taste, and Odor) Carbon Block Filter – 5 Micron natural coconut shells activated carbon cartridge (CCAB technology), capable of removing organic substances, chlorine, benzene ether, DDT, aromatic compounds and carbamate pesticides. It eliminates the bad odor and unpleasant taste of water. Dimensions: 2.8 x 10 inch ( 7 x 25 cm).

Please follow and like us:

ProMarket Set of 3 Filters 2.5 x 10 inch SL (PP 5 Micron + GAC Filter + Carbon Block 5 Micron) for Water Purifier, Under-counter Osmosis Systems and Under-Sink Filters 10 Inch

Set of replacement filters ProMarket for a wide range of standard reverse osmosis systems

Kit of 3 replacement sediment filters – set 3 filters 2.5×10 ” Slim Line (SL) (PP 5 Micron + GAC Filter + Carbon Block 5 Micron) for water purifier, under-counter reverse osmosis (RO) systems and in-line 10-inch under-counter kitchen filters

The gradient fabric with alternating porosity offers greater capacity and longer life.
GAC (Granulated Active Carbon) technology effectively removes organic substances, chlorine and pesticides, as well as the bad odor and unpleasant taste of water. Only natural carbon of vegetable origin. Absorption Filter type.
Melt-blown filter cartridges are made of fused and intertwined food-grade polypropylene fiber without the use of chemical glues. It can effectively remove suspended substances, particulate, rust and other contaminants from liquids, providing efficient filtration and long service life. Mechanical filter type.
CTO (Carbon Block Filter) – 5 Micron coconut natural activated carbon cartridge (CCAB technology), capable of removing organic substances, chlorine and pesticides. Absorption Filter type.
Extended capacity (up to 6 months).

Kit of 3 replacement filters for reverse osmosis water purifiers and in-line under-sink filters. The original and classic solution for all versions with 10 inch containers of any brand.

Recommended for / compatible with: Aquaphor RO, Aquaphor Trio +, Atoll 450 – 460 – 560, Depuragua, Geyser, Honeywell, NATURE WATER PROFESSIONALS and similar.

Fits both accumulation-type and continuous cycle purification systems.
1st filter: PP 5 Micron sediment cartridge: removes sand, rust, and suspended particles. Dimensions: 2.4 x 10 inch ( 6 x 25 cm).
2nd filter: GAC (Granulated Active Carbon) technology effectively removes organic substances, chlorine and pesticides, as well as the bad odor and unpleasant taste of water. Dimensions: 2.8 x 10 inch ( 7 x 25 cm).
3rd filter: CTO (Chlorine, Taste, and Odor) Carbon Block Filter – 5 Micron natural coconut shells activated carbon cartridge (CCAB technology), capable of removing organic substances, chlorine, benzene ether, DDT, aromatic compounds and carbamate pesticides. It eliminates the bad odor and unpleasant taste of water. Dimensions: 2.8 x 10 inch ( 7 x 25 cm).

Please follow and like us: