This combination of high-performance coconut carbon, unique binders and proprietary manufacturing process delivers exceptionally low pressure drop, high dirt holding capacity, and excellent contaminant reduction.
The coconut activated carbon filter works by high adsorption and physical screening of contaminants by collecting organic molecules and other substances on its porous surface, it consists of activated carbon particles fused into a uniform block with enhanced adsorptive capacity and efficiency.
Suitable for removing bad odors and tastes from the water, it improves the water organoleptic characteristics.
The cartridges fit standard housings.
Filter material: extruded coconut carbon.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system.
Warning: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.
- Service life: max. 1 year
- Flow rate: 0,52 gpm (2L/min)
- Pressure: 125psi (8,6bar) max.
- Max differential pressure: 103 kpa (1,03 bar)
- Temperature Rating: 39,2 – 113°F (4 – 45°C)
- Gasket: TPR – Thermo Poli Rock
- End Caps: Polypropylene
- Outer Wrap: Polypropylene
- Netting: Polyethylene
- Efficiency: 85%
- Dimensions H.xO.D.: 10″ x 2-1/2″ (Inch) / 251 x 71 (mm.)
- I.D. Core: 1,062″ (Inch) / 27 (mm.)
Please follow and like us:
Kit of 3 replacement sediment filters AquaPhor – set 3 filters 2.5×10 ” SL (20micron + 5micron + Carbon Block Filter) for water purifier, under-counter RO systems and in-line 10-inch under-counter kitchen filters
The gradient fabric with alternating porosity offers greater capacity and longer life.
CFB (CarbFiber Block) technology effectively removes organic substances, chlorine and pesticides.
The AQUALEN material contains silver ions in their active form.
Extended capacity (up to 6 months)
Kit of 3 filters for reverse osmosis water purifier and in-line under-sink filters. Original for all versions with 10 “containers of any color.
Specific for accumulation and continuous cycle purification systems.
1st filter: PP 20 Micron sediment cloth cartridge, removes sand, rust, suspended particles.
2nd filter: PP cloth cartridge for sediments 5 Micron gradient fabric
3rd filter: CTO (Carbon Block Filter) active carbon cartridge, able to remove organic substances, chlorine and pesticides.
Please follow and like us:
Kit of 3 replacement sediment filters AquaPhor – set 3 filters 2.5×10 ” SL (20micron + 5micron + Carbon Block Filter) for water purifier, under-counter RO systems and in-line 10-inch under-counter kitchen filters
The gradient fabric with alternating porosity offers greater capacity and longer life.
CFB (CarbFiber Block) technology effectively removes organic substances, chlorine and pesticides.
The AQUALEN material contains silver ions in their active form.
Extended capacity (up to 6 months)
Kit of 3 filters for reverse osmosis water purifier and in-line under-sink filters. Original for all versions with 10 “containers of any color. Specific for accumulation and continuous cycle purification systems 10 inch.
1st filter: PP 20 Micron sediment cloth cartridge, removes sand, rust, suspended particles.
2nd filter: PP cloth cartridge for sediments 5 Micron gradient fabric
3rd filter: CTO (Carbon Block Filter) active carbon cartridge 5 Micron, able to remove organic substances, chlorine and pesticides.
Please follow and like us:
Kit of 3 replacement sediment filters – set 3 filters 2.5×10 ” Slim Line (SL) (PP 10 Micron + GAC Filter + PP 1 Micron) for water purifier, under-counter reverse osmosis (RO) systems and in-line 10-inch under-counter kitchen filters
The gradient fabric with alternating porosity offers greater capacity and longer life.
GAC (Granulated Active Carbon) technology effectively removes organic substances, chlorine and pesticides, as well as the bad odor and unpleasant taste of water. Only natural carbon of vegetable origin.
Melt-blown filter cartridges are made of fused and intertwined food-grade polypropylene fiber without the use of chemical glues. It can effectively remove suspended substances, particulate, rust and other contaminants from liquids, providing efficient filtration and long service life.
Extended capacity (up to 6 months).
Kit of 3 replacement filters for reverse osmosis water purifiers and in-line under-sink filters. The original and classic solution for all versions with 10 “containers of any brand.
Recommended for / compatible with: Aquaphor RO, Aquaphor Trio +, Atoll 450 – 460 – 560, Depuragua, Geyser, Honeywell, NATURE WATER PROFESSIONALS and similar.
Fits both accumulation-type and continuous cycle purification systems.
1st filter: PP 10 Micron sediment cartridge: removes sand, rust, and suspended particles. 2.4 x 10 inch ( 6 x 25 cm).
2nd filter: GAC (Granulated Active Carbon) technology effectively removes organic substances, chlorine and pesticides, as well as the bad odor and unpleasant taste of water. 2.8 x 10 inch ( 7 x 25 cm).
3rd filter: PP 1 Micron sediment cartridge: removes sand, rust, and smallest suspended particles. Protects the membrane of RO system and increases its life. 2.4 x 10 inch ( 6 x 25 cm).
Please follow and like us:
Ionicore Blue antibacterial Melt blown polypropylene cartridge is a new type of filter cartridge that meets safer and healthier filtration requirements with high efficiency and dirt holding capacity. The filters are also bacteriostatic for the addiction of silver antibacterial ion to ensure the maximum safety.
Features:
- Service life: Max. 6 months
- Flow rate: 3,5 gpm (13,3L/min)
- Pressure:6bar (87psi) max.
- Max differential pressure: 5 bar (500 kpa) at 21°C
- Temperature Rating: 39,2 – 174°F (4 – 79°C)
- Efficiency: 90%
- Dimensions H.xO.D.: 10″ x 2-1/2″ (Inch) / 254 x 63 (mm.)
- I.D. Core: 1,102″ (Inch) / 28 (mm.)
- Core: Without – Grooves Finishing
- Graded density structure for maximum dirt holding capacity.
- Addiction of silver antibacterial ion ingredient to ensure drinking safety.
- Micro-denier melt-blown PP fiber, high removal ratings, and low-pressure drop.
- Safe materials and high cleaning rate product in compliance with FDA requirements.
Application:
– Food and beverage.
– Bottled water production.
– Household water dispenser, water purification systems.
– Commercial water purification systems, drinking water systems.
Please follow and like us:
Filters manufactured with 100% pure polypropylene wire. They reduce sediments, rust and others suspended impurities. The filter is wound around an internal rigid polypropylene core with a precise model, this guarantees a higher filtering surface. The result is high sediments hold back capacity and a higher efficiency than normal wound polypropylene filters. They will not release taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene construction provides superior chemical resistance. Ideal for a wide variety of food and beverage or industrial filtrations.
Application:
– Food and beverage.
– Bottled water production.
– Household water dispenser, water purification systems.
– Commercial water purification systems, drinking water systems.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system.
Nota bene: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.
Please follow and like us:
Set of two 20 Micron Replacements for a Water Purifier
- The gradient fabric with alternating porosity offers increased capacity and extended durability.
- Extended capacity up to 12 months – per pack (2 filters included)
- Compatible with all versions of 2.5” x 10″ containers
Please follow and like us:
