Description
Aquaphor Crystal KH and PRO KH Cartridges are designed with a blend of premium ion-exchange resins that effectively remove limescale via ion exchange. Over time, as the cartridge is used, the resin will gradually become saturated with limescale deposits.
Regeneration is straightforward and can be done using common table salt.
To regenerate the resin:
- Mix water with a generous amount of salt in a clean, standard plastic bottle with the bottom removed to serve as a funnel.
- Attach the bottle to the pre-assembled adapter.
- Connect this setup to your KH cartridge.
- Pump the saline solution through the cartridge to dissolve and remove the limescale buildup.
Please refer to the “RECOVERY OF KH CARTRIDGE” section in your cartridge’s manual for detailed instructions.
Recovery frequency depends on the initial hardness of your water. The KH softening cartridge, with its ion-exchange resin, is ideal for water with moderate to average hardness. For water hardness levels exceeding 5 mEq/L, the use of a reverse osmosis water filter is advisable for optimal results.
ATTENTION! Mind the order of cartridges installation.
Positions of the cartridges in the water filter assembly are
given in Table 1. Replacement Cartridges installation sequence/
EAN: 4600987002347
This post is also available in: Italiano (Italian)
