Description
Ultrafine cleaning. Complete removal of bacteria and viruses Removing soluble salts. Softening of the water.
The original DOW membrane is Filmtec with a hologram and serial number. Made in the USA.
Fits a wide range of standard reverse osmosis systems: Aquaphor RO, Aquaphor Trio +, Atoll 450 – 460 – 560, Depuragua, Geyser, HoneyWell and similar.
Productivity 7.9 liters per hour (about 189 liters per day) – optimal for home use or a small office.
The degree of purification – at least 98% of all contaminants remaining after the pre-treatment steps
Reverse osmosis membrane Filmtec are the most reliable industry for home drinking water.
Advanced membrane technology and automated in filmtec reverse fabric osmosis membranes enable these elements to offer consistent performance for all customers.
The filmtec tw30 – 1812 – 50 reverse osmosis membrane element is NSF / ANSI standard 58 listed.
Filmtec home drinking water elements are equal to 50 psi and purify the water about 20% more than competitive components up to 60 psi.
Dimensions: 4.4 cm x 29.8 cm.
Maximum work temperature: 45 ° C.
Flow rate (GPD): 50 psig 50 GPD (permeated flows for individual elements may vary +/- 20%).
Maximum operating pressure: 300 psig (21 bar).
Maximum supply 7.9 liters per hour (approximately 189 liters per day).
Free chlorine tolerance: continuous operation: 2 – 11. (maximum continuous operating temperature above pH 10 is 35 ° C. PH short-term cleaning (30 min.): 1 – 12.
The recommended frequency of replacement (when using after 3-stage prefilters) at least once in 24-30 months.
Note: different light and screen may cause the color of the item in the photo a little different from the real one.
The warranty does not cover spare parts and cartridges, does not cover any damage to third parties. If you have any complaints about the quality of the filter, contact the seller or the manufacturer. Complaints regarding the damaged water purifier (in any way), or without verification by the seller, will not be accepted.
Use in accordance with the instructions for your reverse osmosis system. Only install after a system of preliminary filtration of particles no more than 1 micron.
This post is also available in: Italiano (Italian)
