ProMarket standard faucet for Reverse osmosis and other under-counter water filters.
Solid modern design, JG 1/4 tube connection.
Robust ceramic valve.
Metallic tube connector.
Handle type: Star-3
Hole diameter 11 mm.
Suitable for Aquaphor Morion, Crystal, and other similar systems.
RO 50 reverse osmosis with a tank with pump and UV lamp. New domestic reverse osmosis range with pressurized 11 l. accumulator tank. The equipment provides 50 GPD and a booster pump.
The prefiltration is made through 2 melt-blown polypropylene prefilters from 5 microns and a carbon GAC drop-in cartridge. The water then passes through lonicore membrane, which carries out the reverse osmosis process, then the water line filter re-filters the water.
The system is complete with an installation kit and a separate faucet for depurated water.
Features:
* Input temperature (MAX.-MIN.): 5°C-38 C:
* Input TDS (MAX.): 2.000ppm;
* With pump input pressure (MAX.-MIN.): 1-4 bar:
* Nominal production: 150 It./day (50GPD lonicore USmotic TFC):
*Nominal production: 245 It./day (75GPD lonicore USmotic TFC):
* Membrane: 1×2012 50GPD lonicore USmotic TFC
* Max. water storage: 11lt. (precharged tank 5-8 PSl or 0,35-0.55 bar):
* Power supply: 220-240V 50HZ 24W. – Italian 3-plug L type:
* Electrical pump: input 100-240V. 50/60HZ. output 24 Vdc 2.5A:
* Dimensions without pump HXLXP: 385x390x155 mm;
* Dimensions with pump HXLXP: 445x380x 180 mm;
* Tank diameter x H.: 340×240 mm.
Components:
* 3 housing 10″ white (2x polypropyiene melt blow pre-filter 5 micron + carbon GAC cartridge);
* UltraRays UV system 6W. 1/4″
* ln-ine Post carbon filter 2″x10″;
* Chrome faucet, Connection kit;
* Housing wrech + Housing 2,5″ for reverse osmosi membrane;
* Tube JG 1/4″.
Other names: RO-50 UV, RO50 UV
Reverse osmosis membrane provides ultrafiltration of all contaminants including cysts, bacteria and viruses.
It also removes water hardness from any initial level. Provides absolute long-term protection from scaling.
This membrane has a performance of 7.8 liters per hour (50 Gallons/Day).
Fast change Push-and-turn technology.
Reduces bacteria: 99.9%
Category: Reverse osmosis filters
Recommended for purifiers, under-counter water filtration systems: RO-101, Aquaphor Morion DWM-101 drinking water machine and analogs.
Replace the membrane cartridge at least once a year. **
Alternative name: OSMO-50-K
Please pay attention and double-check which Morion filter model you’re choosing this membrane for and if it feats
** Service life of membrane element is directly dependent on the operation of pre-treatment cartridges.
Please replace filter cartridges timely
Reverse osmosis membrane provides ultrafiltration of all contaminants including cysts, bacteria and viruses.
It also removes water hardness from any initial level. Provides absolute long-term protection from scaling.
This membrane has the performance of 7.8 liters per hour (150 Gallons/Day).
Fast change Push-and-turn technology.
Reduces bacteria: 99.9%
Category: Reverse osmosis filters
RO150S (KO150S) Recommended for purifiers, under-counter water filtration systems: DWM 203s, RO-203s, RO-206s HoReCa, RO-206s
Other names: RO 150 s, RO150s, KO 150 s, KO-150-s
Compatible with RO-101s, Aquaphor Morion DWM-101s drinking water machine and analogs.
Replace the membrane cartridge at least once a year. **
Please pay attention and double-check for which DWM filter model you’re choosing this membrane and if it feats
** Service life of membrane element is directly dependent on the operation of pre-treatment cartridges.
Please replace filter cartridges timely
Aquaphor standard faucet for Reverse osmosis and under counter water filters.
Solid modern design, JG tube connection. Hole diameter 10 mm.
Suitable for Aquaphor Morion, Crystal, other similar systems.
Direct flow reverse osmosis system with 4 stages of purification to remove up to 99.9% of chlorine, minerals, heavy metals, pesticides, organic substances, bacteria, and viruses.
Reinforced chassis with rack bracket in high-quality metal with stainless steel screws, patented and leak-resistant high-pressure switches, installation kit with tubes and 1-way Long-reach faucet with metal handle included. The system supplies ambient temperature osmotic water to drink and cook with maximum security.
The certified product according to UNE149101, Italian Decree 25/2012 and 174/2004.
The benefits of RO C500:
– Effective pre-filtration.
– Sturdy filter housing base that can be surface-mounted or hung on the wall.
– Classic, inexpensive and widely used 10″ filter cartridges, which are manufactured by a multitude of companies around the world.
– Low price with excellent quality and European assembly (within 500 euros).
– The integrated pump enables the system to be used when the water supply pressure is low and accelerates the filtration process. Thanks to the pressure booster pump, the system can be operated at a rather low line pressure of 1 atm. The pump is equipped with an electrical adapter and works with a safety voltage of 24 or 36 V.
– If required, the system may be easily supplemented with a UV lamp and TDS controller. If needed, simply increase the filter capacity by installing a larger membrane or a second parallel membrane.
Technical features*:
* 1st stage: Green Filter Melt blown polypropylene cartridge 9-3/4″ – 5 micron
* 2nd stage: Green Filter granular activated carbon cartridge (GAC) 9-3/4″
* 3rd stage: Green Filter Carbon Block cartridge 2,5”x9-3/4″ – 10 micron
(Alternative: Pentek SCBC-10 silver Carbon Block cartridge 2-7/8”x9-3/4″ – 0,5 micron)
* 4rd stage: LG / Greenfilter membrane TFC 3013 – 400 GPD
Specifications*:
* Flow rate: 400GPD (65lt./h)
* Booster pump: RO500 – 24/36V. – 3A
* Membranes style: Dry
* Membranes cleaning: Manual flushing
* Maximum inlet salinity: 1.500ppm.
* TDS regulator in accordance with your taste (mineral salts outgoing)
* Pressure gauge: Outlet booster pump pressure
* Working pressure: 0,3~0,6MPa (3~6 bar)
* Working temperature: 35.6 – 104°F / 2 – 40°C.
* Power supply: 100-240 Vac 50/60 Hz: 36V. 3A
* Rating power: 54W.
* Average NaCl rejection: >95%
* Recovery rate: >25%
* Dimensions(mm): H470 x L360 x P210
* Color: white, black
How works the reverse osmosis (RO):
Reverse osmosis is a traditional, time-tested water purification method. It removes all types of water contaminants including hardness, bacteria, viruses, nitrates, nitrites, traces of pharmaceuticals, and any particles down to 0.0005 microns. Reverse osmosis filters have the most perfect degree of purification. They filter water slowly but retain not only common impurities but also impurities and toxins dissolved in water. Moreover, the membrane of the reverse osmosis filter traps most biological impurities, such as cholera bacteria, hepatitis viruses, and the Sars-Cov-2 coronavirus. At the exit of the reverse osmosis filter, we get the purest water without foreign smells and tastes. This water is better for your health, it has exceptional taste, clarity, and softness.
However Reverse osmosis system is not a device that magically makes any water drinkable (non-drinkable water into drinkable water) and it works only if it’s installed on water that complies with the basic norms, e.g. municipal potable water or well water that was previously made drinkable with adequate and effective systems, preventively studied and personalized for that kind of water. Do not use the system where the water is microbiologically dangerous or of unknown quality without adequate disinfection before and after the system. All systems must be installed according to the manufacturer’s instructions. In case of potable inlet water of bad quality, it’s recommended to close all the outgoing mineral salts regulator (TDS) and to mount, as the last stage, a remineralizing filter that stabilizes the PH.
Manuals (installation and use) of RO system C-500 (c 500, c 500 v2)*:
Manual-English_C500-2_RO_wm.pdf
MANUALE_ROC500_ITA_wm.pdf
RO_C500-2_manual_IT_wm.pdf
More information about drinking water purification:
ProMarket info website,
Blog: news and articles
* some details may vary in different versions
The reverse osmosis (abbreviation: RO, from English Reverse Osmosis) is the process that represents the better water filtration technique because is not a simply unwanted substances reduction but is able to remove contaminants, harmful and mineral salts at the ionic level. The RO membrane element is generally made of polyamide (PA).
These R.O. TFC (thin film composite) membranes are available in flow rates ranging from 50 to 200 Gallons per day for use in standard residential membrane housings. All models are certified to NSF/ANSI 58 for the reduction of Arsenic (“V” pentavalent), Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Cysts, Turbidity, Fluoride, Lead, Radium 226/228, Selenium and TDS and are certified D.M. 174/2004 (Italian Ministerial Decree). The membrane remove up to 98% of total dissolved solids (TDS), delivering healthier and safer drinking water.
Features:
* High Rejection & Flow Rate
* Standard dimensions: can be fitted in any RO systems
* Max. inlet Hardness: 25°F. (250ppm)
* Max. Free Chlorine: 0.1 ppm
Type of membrane: Spiral wound
The membrane consists of 3 layers
1. Cross linked fully aromatic polyamide 0.2 µm.
2. Polysulfone 40 µm.
3. Non woven fabric polyester 120 µm.
Spacer: EPDM
Active surface:
50 GPD 0.37 m2 (3.9 sq. ft)
TFC Nominal Rejection Characteristics:
Calcium: 93-98%
Sodium: 92-98%
Magnesium: 93-98%
Potassium: 92-96%
Manganese: 96-98%
Iron: 96-98%
Aluminum: 96-98%
Copper: 96-98%
Nickel: 96-98%
Cadmium: 93-97%
Silver: 93-96%
Zinc: 96-98%
Mercury: 94-97%
Hardness Ca & Mg: 93-97%
Radioactivity: 93-97%
Chloride: 92-95%
Ammonium: 80-90%
Bromide: 90-95%
Phosphate: 95-98%
Chromate: 85-95%
Cyanide: 85-95%
Sulfate: 96-98%
Thiosulfate: 96-98%
Silicate: 92-95%
Silica: 80-90%
Nitrate: 90-95%
Boron: 50-70%
Borate: 30-50%
Fluoride: 92-95%
Polyphosphate: 96-98%
Orthophosphate: 96-98%
Chromate: 85-95%
Virus and Bacteria: 99% +
Lead: 95-98%
The rejection percent can vary on the basis of pressure, PH, temperaure and general water quality of the feed water.
WARNING
The reverse osmosis is not a device that makes water drinkable (non-drinkable water into drinkable water) and it works only if it’s installed on water complies with the law, municipal potable water or well water if previously made drinkable with adequate and effective systems, preventively studied and personalized for that kind of water. Do not use the system where the water is microbiologically dangerous or of unknown quality without adequate disinfection before and after the system. All systems must be preserved according to the producer’s instructions. The pollutant parts removed or reduced by this system are not necessarily in your water. Suggest replacement of membrane elements: when flow comes too slow or at least 24 months.
The DOW / Dupont FilmTec original TW30-1812-50HR reverse osmosis membrane removes potentially harmful chemicals like lead, chromium and nitrates from your drinking and cooking water. Total dissolved solids, including many other unhealthy contaminants, are effectively swept away from the water you use. This membrane consistently produces better, cleaner water for your household to consume and enjoy.
Other names: TW 30 – 1812 – 50HR; TW-1812-50HR; TW30 1812-50 HR; TW30-1812-50 gpd HR
Made in the USA by FilmTec, the worldwide leader in integrated membrane technology and element manufacturing, using the stringent 6-sigma system. Branded DOW / Dupont.
RO 50 reverse osmosis with a tank, with a pump. New domestic reverse osmosis product line with pressurized 11 lts. accumulator tank. The equipment provides 50 GPD and a booster pump.
The prefiltration is made through 2 melt-blown polypropylene prefilters from 5 microns and a carbon GAC drop-in cartridge. The water then passes through the lonicore membrane, which carries out the reverse osmosis process, then the water line filter re-filters the water.
The system is complete with an installation kit and a separate faucet for clean water.
Features:
* Input temperature (MAX.-MIN.): 5°C-38 C:
* Input TDS (MAX.): 2.000ppm;
* With pump input pressure (MAX.-MIN.): 1-4 bar:
* Nominal production: 150 It./day (50GPD lonicore USmotic TFC):
*Nominal production: 245 It./day (75GPD lonicore USmotic TFC):
* Membrane: 1×2012 50GPD lonicore USmotic TFC
* Max. water storage: 11lt. (precharged tank 5-8 PSl or 0,35-0.55 bar):
*Power supply: 220-240V 50HZ 24W. – Italian 3-plug L type:
* Electrical pump: input 100-240V. 50/60HZ. output 24 Vdc 2.5A:
* Dimensions without pump HXLXP: 385x390x155 mm;
* Dimensions with pump HXLXP: 445x380x 180 mm;
* Tank diameter x H.: 340×240 mm.
Components:
* 3 housing 10″ white (2x polypropylene melt blow pre-filter 5 micron + carbon GAC cartridge);
* 1 inline Post carbon 2″x10″;
* Chrome faucet: Connection kit;
* Housing wrench + Housing 2,5″ for reverse osmosis membrane;
* Tube 1/4″.
Other names: RO-50 , RO50 , RO 50, RO_50
Colors, design elements and minor design changes can be made by the manufacturer without additional notice, without changing the main characteristics of the device.
Learn more about drinking water purification systems from our blog articles.
