You searched for CARTRIDGE KIT : Page 3 of 4 : ProMarket

ProMarket Set of 3 Filters 2.5 x 10 inch SL (PP 10 Micron + GAC Filter + PP 1 Micron) for Water Purifier, Under-counter Osmosis Systems and Under-Sink Filters 10 Inch

Set of replacement filters for a wide range of standard reverse osmosis systems

Kit of 3 replacement sediment filters – set 3 filters 2.5×10 ” Slim Line (SL) (PP 10 Micron + GAC Filter + PP 1 Micron) for water purifier, under-counter reverse osmosis (RO) systems and in-line 10-inch under-counter kitchen filters

The gradient fabric with alternating porosity offers greater capacity and longer life.
GAC (Granulated Active Carbon) technology effectively removes organic substances, chlorine and pesticides, as well as the bad odor and unpleasant taste of water. Only natural carbon of vegetable origin.
Melt-blown filter cartridges are made of fused and intertwined food-grade polypropylene fiber without the use of chemical glues. It can effectively remove suspended substances, particulate, rust and other contaminants from liquids, providing efficient filtration and long service life.
Extended capacity (up to 6 months).

Kit of 3 replacement filters for reverse osmosis water purifiers and in-line under-sink filters. The original and classic solution for all versions with 10 “containers of any brand.

Recommended for / compatible with: Aquaphor RO, Aquaphor Trio +, Atoll 450 – 460 – 560, Depuragua, Geyser, Honeywell, NATURE WATER PROFESSIONALS and similar.

Fits both accumulation-type and continuous cycle purification systems.
1st filter: PP 10 Micron sediment cartridge: removes sand, rust, and suspended particles. 2.4 x 10 inch ( 6 x 25 cm).
2nd filter: GAC (Granulated Active Carbon) technology effectively removes organic substances, chlorine and pesticides, as well as the bad odor and unpleasant taste of water. 2.8 x 10 inch ( 7 x 25 cm).
3rd filter: PP 1 Micron sediment cartridge: removes sand, rust, and smallest suspended particles. Protects the membrane of RO system and increases its life. 2.4 x 10 inch ( 6 x 25 cm).

Please follow and like us:

Reverse Osmosis Water Filtration System RO 50 with Tank, boost pump and UV lamp

RO 50 reverse osmosis with a tank with pump and UV lamp. New domestic reverse osmosis range with pressurized 11 l. accumulator tank. The equipment provides 50 GPD and a booster pump.

The prefiltration is made through 2 melt-blown polypropylene prefilters from 5 microns and a carbon GAC drop-in cartridge. The water then passes through lonicore membrane, which carries out the reverse osmosis process, then the water line filter re-filters the water.

The system is complete with an installation kit and a separate faucet for depurated water.

Features:
* Input temperature (MAX.-MIN.): 5°C-38 C:
* Input TDS (MAX.): 2.000ppm;
* With pump input pressure (MAX.-MIN.): 1-4 bar:
* Nominal production: 150 It./day (50GPD lonicore USmotic TFC):
*Nominal production: 245 It./day (75GPD lonicore USmotic TFC):
* Membrane: 1×2012 50GPD lonicore USmotic TFC
* Max. water storage: 11lt. (precharged tank 5-8 PSl or 0,35-0.55 bar):

* Power supply: 220-240V 50HZ 24W. – Italian 3-plug L type:
* Electrical pump: input 100-240V. 50/60HZ. output 24 Vdc 2.5A:
* Dimensions without pump HXLXP: 385x390x155 mm;
* Dimensions with pump HXLXP: 445x380x 180 mm;
* Tank diameter x H.: 340×240 mm.

Components:
* 3 housing 10″ white (2x polypropyiene melt blow pre-filter 5 micron + carbon GAC cartridge);
* UltraRays UV system 6W. 1/4″
* ln-ine Post carbon filter 2″x10″;
* Chrome faucet, Connection kit;
* Housing wrech + Housing 2,5″ for reverse osmosi membrane;
* Tube JG 1/4″.

Other names: RO-50 UV, RO50 UV

Please follow and like us:

Dayton 30 water softener – 30 lt, ideal for 7-10 people

Softening of next-generation – valve volume and easy programming. Dayton delayed regeneration valve 859D to the mixing valve to adjust the hardness out. Electronic controller integrated into the top cover.

Pre-assembled and tested system for easier installation and start-up. Battery incorporated for dynamic memory.

Four different regeneration: Time initiated – Delayed regenerations according to selected frequency (Ex: Softener will regenerate every three days at 02:00 AM). Meter immediate – Regenerations are started after treating the programmed volume of water. Delayed regenerations – Regenerations are started after treating the programmed volume of water at the programmed hour. Mixed regeneration – Similar to delayed regeneration, but it allows to program a maximum period of time without regenerations. After this time the system will start a delayed regeneration. CE, NSF, D.M. 25, D.M. 174 Certified.

Features
* Pressure min.: 2,5 bar(2,5 kg/cm2)
* Pressure Max.: 8 bar(8 kg/cm2)
* Temperature Min: 4°C
* Temperature Max: 35°C
* Inlet/Outlet water 1″ M. (30lt.), 3/4″ M. (slim 7, slim 12, 12.5, slim 18, 18lt.)

Water hardness (limestone)
In °F (French degrees), can be measured with the drops of Titrant, important to determine the choice of the type of water softener and optimize the consumption of salt.

Ability to interchange
The hardness of the water softener is able to hold.
7 slim resin liters: 22ºHFxm3 * 12 slim resin Liters: 49ºHFxm3 * 12.5 resin Liters: 49ºHFxm3 * 18 slim resin Liters: 97ºHFxm3 * 18 resin Liters: 97ºHFxm3 * 30 resin Liters: 170ºHFxm3.

Sample calculation to determine the correct article
A water softener of 30 liters resin with a hardness of 40°F (medium-high hardness), develops 4.250 liters of softened water (170:40 = 4.250). In this case, must planning 4.2m3 in treatment capacity of the softener through the buttons on the display and provides free water softener without scale at zero French degrees.

Adjustment of the hardness out.
It’s recommended to not leak totally softened water in a residential installation. Dayton Water softeners have a residual hardness integrated regulator that allows you to precisely adjust the hardness of the treated water. To adjust the residual hardness must then carefully open the regulator MIX valve. All softeners are supplied with the valve fully closed and then will deliver water at 0°F. For water intended for human consumption, we recommend a residual hardness between 5 and 10ºF for copper pipes and between 8 and 10 º F for iron pipes. Depending on the hardness out planned, the water softener will tend to produce more water and less sweetened salt intake because the input hardness must be compensated with the output value. A water softener of 30-liter resin with a hardness of incoming 40°F and 5°F and out of hardness develops 4.857lit. of softened water (170:35=4.857). In this case, must planning 4.9 m3 in the treatment capacity of the softener through the buttons on the display. The average every person consumes 150 liters of water a day is recommended and a regeneration time scheduled every 4/5 days, then a family of 4 with water at 40°F consumes x5 days 3.000 liters, a 30 liters of water softener so with a planned regeneration even at 6 days can be installed.

Benefits and advantages
Reduction of water hardness, which is the cause of scale. ENERGY SAVING: the device prevents the formation of deposits in pipes and hydraulic lines. Greater sense of wellness during the shower. Skin soft and clean. Increased duration of appliances and boilers. COST SAVING: reduction in the use of soaps, fabric softeners, and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worry about adding salt to the water softener.

Increased sodium (for drinking water)
Most of the sodium consumed is taken with food, especially those produced by industrial processing. Salt is an excellent preservative and is used as an additive for processed products. The intake of sodium with the water we drink is relatively low compared to that which is taken with food. All softeners produce soft water using ion exchange resins in the produce softened water output of sodium ions. The recommended sodium limit for water intended for human consumption is 200 liters ppm. Depending on the concentration of sodium and water hardness, the water can have a concentration of sodium than recommended. Where this occurs, or if you need to follow a diet low in salt, it is advisable to install reverse osmosis drinking water for the home.

* Regeneration salt consumption: 3,6 kg salt.
* Water consumption for regeneration: 150lt.
* Exit treated water befor regeneration: 35°F-4,850m3, 40°F-4,250m3, 45°F-3,770m3, 50°F-3,400m3, 60°F-2,830m3.
* Working flow 1,2 m3/h
* Working flow MAX 1,8 m3/h
* Dimensions mm (WxDxH) 300 x 500 x 1045

No need to soften all the water in the house?
It makes sense to pay attention to microfiltration systems for drinking water in the kitchen with a softening cartridge. They will make the water for drinking and cooking soft, and also clean. Another way to radically improve water quality is reverse osmosis systems, which provide almost complete water purification from all soluble and insoluble impurities.

Aquaphor Crystal HA for hard water – Under the Counter Water Filter Unit

https://market.promarket-eu.com/product/aquaphor-morion-dwm-101s-compact-reverse-osmosis-water-filter-system-aquaphor-dwm-101s-morion-ro-101s-sistema-filtrazione-acqua-4-fasi-a-osmosi-inversa-depuratore-acqua-reverse-osmosis-drinking-w/

Please follow and like us:

RO C500 direct flow (tankless) reverse osmosis system 65lt./h. 400 GPD

RO-C500 direct flow reverse osmosis system

Direct flow reverse osmosis system with 4 stages of purification to remove up to 99.9% of chlorine, minerals, heavy metals, pesticides, organic substances, bacteria, and viruses.
Reinforced chassis with rack bracket in high-quality metal with stainless steel screws, patented and leak-resistant high-pressure switches, installation kit with tubes and 1-way Long-reach faucet with metal handle included. The system supplies ambient temperature osmotic water to drink and cook with maximum security.
The certified product according to UNE149101, Italian Decree 25/2012 and 174/2004.

The benefits of RO C500:
– Effective pre-filtration.
– Sturdy filter housing base that can be surface-mounted or hung on the wall.
– Classic, inexpensive and widely used 10″ filter cartridges, which are manufactured by a multitude of companies around the world.
– Low price with excellent quality and European assembly (within 500 euros).
– The integrated pump enables the system to be used when the water supply pressure is low and accelerates the filtration process. Thanks to the pressure booster pump, the system can be operated at a rather low line pressure of 1 atm. The pump is equipped with an electrical adapter and works with a safety voltage of 24 or 36 V.
– If required, the system may be easily supplemented with a UV lamp and TDS controller. If needed, simply increase the filter capacity by installing a larger membrane or a second parallel membrane.

Technical features*:
* 1st stage: Green Filter Melt blown polypropylene cartridge 9-3/4″ – 5 micron
* 2nd stage: Green Filter granular activated carbon cartridge (GAC) 9-3/4″
* 3rd stage: Green Filter Carbon Block cartridge 2,5”x9-3/4″ – 10 micron
(Alternative: Pentek SCBC-10 silver Carbon Block cartridge 2-7/8”x9-3/4″ – 0,5 micron)
* 4rd stage: LG / Greenfilter membrane TFC 3013 – 400 GPD

Specifications*:
* Flow rate: 400GPD (65lt./h)
* Booster pump: RO500 – 24/36V. – 3A
* Membranes style: Dry
* Membranes cleaning: Manual flushing
* Maximum inlet salinity: 1.500ppm.
* TDS regulator in accordance with your taste (mineral salts outgoing)
* Pressure gauge: Outlet booster pump pressure
* Working pressure: 0,3~0,6MPa (3~6 bar)
* Working temperature: 35.6 – 104°F / 2 – 40°C.
* Power supply: 100-240 Vac 50/60 Hz: 36V. 3A
* Rating power: 54W.
* Average NaCl rejection: >95%
* Recovery rate: >25%
* Dimensions(mm): H470 x L360 x P210
* Color: white, black

How works the reverse osmosis (RO):
Reverse osmosis is a traditional, time-tested water purification method. It removes all types of water contaminants including hardness, bacteria, viruses, nitrates, nitrites, traces of pharmaceuticals, and any particles down to 0.0005 microns. Reverse osmosis filters have the most perfect degree of purification. They filter water slowly but retain not only common impurities but also impurities and toxins dissolved in water. Moreover, the membrane of the reverse osmosis filter traps most biological impurities, such as cholera bacteria, hepatitis viruses, and the Sars-Cov-2 coronavirus. At the exit of the reverse osmosis filter, we get the purest water without foreign smells and tastes. This water is better for your health, it has exceptional taste, clarity, and softness.

How to works reverse osmosis (RO) membrane — How works the reverse osmosis (RO) membrane

However Reverse osmosis system is not a device that magically makes any water drinkable (non-drinkable water into drinkable water) and it works only if it’s installed on water that complies with the basic norms, e.g. municipal potable water or well water that was previously made drinkable with adequate and effective systems, preventively studied and personalized for that kind of water. Do not use the system where the water is microbiologically dangerous or of unknown quality without adequate disinfection before and after the system. All systems must be installed according to the manufacturer’s instructions. In case of potable inlet water of bad quality, it’s recommended to close all the outgoing mineral salts regulator (TDS) and to mount, as the last stage, a remineralizing filter that stabilizes the PH.

Manuals (installation and use) of RO system C-500 (c 500, c 500 v2)*:
Manual-English_C500-2_RO_wm.pdf
MANUALE_ROC500_ITA_wm.pdf
RO_C500-2_manual_IT_wm.pdf

More information about drinking water purification:
ProMarket info website,
Blog: news and articles

* some details may vary in different versions

Please follow and like us:

Dayton 12.5 water softener (12,5 lt., resin) ideal for 2-3 people

Softening of next-generation valve volume and easy programming. Dayton delayed regeneration valve 859D to the mixing valve to adjust the hardness out. Bypass installation included. Electronic controller integrated into the top cover. Pre-assembled and tested system for easier installation and start-up. Battery incorporated for dynamic memory. Four different regeneration: Time initiated – Delayed regenerations according to selected frequency (Ex: Softener will regenerate every three days at 02:00 AM). Meter immediate – Regenerations are started after treating the programmed volume of water. Delayed regenerations – Regenerations are started after treating the programmed volume of water at the programmed hour. Mixed regeneration – Similar to delayed regeneration, but it allows to program a maximum period of time without regenerations. After this time the system will start a delayed regeneration. CE, NSF, D.M. 25, D.M. 174 Certified.

Water hardness (limestone)
In °F (French degrees), can be measured with the drops of Titrant, important to determine the choice of the type of water softener and optimize the consumption of salt.

Sample calculation to determine the correct article
A water softener of 30 liters resin with a hardness of 40°F (medium-high hardness), develops 4.250liters of softened water (170:40 = 4.250). In this case, must planning 4.2m3 in treatment capacity of the softener through the buttons on the display and provides free water softener without scale at zero French degrees.

Adjustment of the hardness out
It’s recommended to not leak totally softened water in a residential installation. Dayton Water softeners have a residual hardness integrated regulator that allows you to precisely adjust the hardness of the treated water. To adjust the residual hardness must then carefully open the regulator MIX valve. All softeners are supplied with the valve fully closed and then will deliver water at 0°F. For water intended for human consumption, we recommend a residual hardness between 5 and 10ºF for copper pipes and between 8 and 10 º F for iron pipes. Depending on the hardness out planned, the water softener will tend to produce more water and less sweetened salt intake because the input hardness must be compensated with the output value. A water softener of 30-liter resin with a hardness of incoming 40°F and 5°F and out of hardness develops 4.857lit. of softened water (170:35=4.857). In this case, must planning 4.9 m3 in the treatment capacity of the softener through the buttons on the display. The average every person consumes 150 liters of water a day is recommended and a regeneration time scheduled every 4/5 days, then a family of 4 with water at 40°F consumes x5 days 3.000 liters, a 30 liters of water softener so with a planned regeneration even at 6 days can be installed.

Benefits and advantages
Reduction of water hardness, which is a cause of scale. ENERGY SAVING: the device prevents the formation of deposits in pipes and hydraulic lines. Greater sense of wellness during the shower. Skin soft and clean. Increased duration of appliances and boilers. COST SAVING: reduction in the use of soaps, fabric softeners, and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worry about adding salt in the water softener.

Increased sodium (for drinking water)
Most of the sodium consumed is taken with food, especially those produced by industrial processing. Salt is an excellent preservative and is used as an additive for processed products. The intake of sodium with the water we drink is relatively low compared to that which is taken with food. All softeners to produce soft water using ion exchange resins in the produce softened water output of sodium ions. The recommended sodium limit for water intended for human consumption is 200 liters ppm. Depending on the concentration of sodium and water hardness, the water can have a concentration of sodium than the recommended. Where this occurs, or if you need to follow a diet low in salt, it is advisable to install reverse osmosis drinking water for the home.

* Regeneration salt consumption: 1,00 kg/salt.
* Water consumption for regeneration: 62,5lt.
* Number treated water for regeneration, 35°F-1,400m3, 40°F-1,225m3, 45°F-1,088m3, 50°F-0,980m3, 60°F-0,816m3.
* Working flow 0,5m3/h
* Working flow MAX 0,75m3/h
* Dimensions mm (WxDxH) 300 x 500 x 580

No need to soften all the water in the house?
It makes sense to pay attention to microfiltration systems for drinking water in the kitchen with a softening cartridge. They will make the water for drinking and cooking soft, and also clean. Another way to radically improve water quality is reverse osmosis systems, which provide almost complete water purification from all soluble and insoluble impurities.

Aquaphor Crystal HA for hard water – Under the Counter Water Filter Unit

https://market.promarket-eu.com/product/aquaphor-morion-dwm-101s-compact-reverse-osmosis-water-filter-system-aquaphor-dwm-101s-morion-ro-101s-sistema-filtrazione-acqua-4-fasi-a-osmosi-inversa-depuratore-acqua-reverse-osmosis-drinking-w/

Please follow and like us:

ERGO 11 Home Volumetric Water Softener (11 lt of resin) ideal for 4-6 people

ERGO 11 Volumetric Water Softener is ideal for 4/6 people.
Work without a power supply.

Designed according to the needs of installation technicians and professionals of the water treatment branch, the ERGO equipment has the most advanced technology to facilitate installation and maximize reliability. The ERGO valve, made of Noryl, has a totally hydraulic system and works without electricity. The DIRECT ACCESS system makes programming easier and guarantees correct commissioning. ERGO includes the revolutionary SAVING REGEN system. The most modern technology in water softening applied to the ERGO equipment.

Designed for the house and other commercial applications, ERGO water softeners require little space and are capable of producing quick regenerations thanks to the SPEED REGEN system. Furthermore, the ERGO HIGH FLOW system prepares the equipment to cover up to 100% of the needs of your house and other commercial installations.

Standard bypass: the bypass guarantees that the user can select the water he needs.
It also includes a hardness mixing valve.

Easy Access to the tank: the accessibility to the tank allows using salt blocks or tablets in the same equipment.

Design with an easy-to-access lid: the design of the ERGO equipment makes installation and maintenance easier to reduce costs.

Features:
– Uses less water;
– Non-electric water softener;
– High flow;
– Regeneration within 15 minutes;
– Low salt consumption.

Benefits and savings
– Protect your pipes and prevent limescale build-up, which would increase energy consumption when heating water.
– Your household appliances such as washing machines, boilers, dishwashers, etc. will last longer and consume fewer anti-limescale products.
– Protect your glassware and tableware from lime; save money by reducing anti-limescale chemical products.
– Protect toilets and taps, and have them shining as new.
– Well-being in the bathroom and the shower. Softened water is ideal for sensitive skin. Reduce costs in skin care products and moisturizers.
– Your clothes will be cleaner and have brighter colors; fabric will be softer. Save soap and fabric softeners.

Water softener parts (see image A)
1. SAVING REGEN SYSTEM: Low water and salt consumption. Environmentally safe. Standard bypass for residual hardness.
2. DIRECT ACCESS: ERGO valve without electricity. Ready to be used by simply turning a screwdriver.
3. HIGH FLOW RESIN: Ultra-fast regeneration within 15 minutes.
4. Salt valve with safety floating valve.
5. Fine Mesh compact monosphere resin bed. Great flow in little space.
6. High-quality housing made of heavy-duty injection-molded plastic.
7. Salt tablets.
8. Salt blocks.

* Resin volume: 10,5 lt.
* Working flow: 2,1 m3/h
* Working flow: 2,1 m3/h
* Exchange capacity: 23,7ºHFxm3
* Regeneration salt consumption: 0,36 Kg./sale
* Number treated water for regeneration: 15°F-1, 250m3, 20°F-0,938m3, 25°F-0,750m3, 30°F-0,625m3, 40°F-0,469m3, 50°F-0,375m3, 60°F-0,313m3, 60°F-0,268m3.
* Maximum hardness: 73°HF
* Water consumption for regeneration: 25 lt.
* Regeneration duration: 15 min.
* Temperature protection: Protection against freezing
* Temperature range: 1,7 – 45ºC
* Inlet Pressure (min./max.): 1,7 – 8 bar
* Dimensions mm (HxLxP) 608 x 500 x 297

No need to soften all the water in the house?
It makes sense to pay attention to microfiltration systems for drinking water in the kitchen with a softening cartridge. They will make the water for drinking and cooking soft, and also clean. Another way to radically improve water quality is reverse osmosis systems, which provide almost complete water purification from all soluble and insoluble impurities.

Aquaphor Crystal HA for hard water – Under the Counter Water Filter Unit

https://market.promarket-eu.com/product/aquaphor-morion-dwm-101s-compact-reverse-osmosis-water-filter-system-aquaphor-dwm-101s-morion-ro-101s-sistema-filtrazione-acqua-4-fasi-a-osmosi-inversa-depuratore-acqua-reverse-osmosis-drinking-w/

Please follow and like us:

Reverse Osmosis Water Filtration System RO 50 with Tank with pump

RO 50 reverse osmosis with a tank, with a pump. New domestic reverse osmosis product line with pressurized 11 lts. accumulator tank. The equipment provides 50 GPD and a booster pump.

The prefiltration is made through 2 melt-blown polypropylene prefilters from 5 microns and a carbon GAC drop-in cartridge. The water then passes through the lonicore membrane, which carries out the reverse osmosis process, then the water line filter re-filters the water.

The system is complete with an installation kit and a separate faucet for clean water.

*Power supply: 220-240V 50HZ 24W. – Italian 3-plug L type:
* Electrical pump: input 100-240V. 50/60HZ. output 24 Vdc 2.5A:
* Dimensions without pump HXLXP: 385x390x155 mm;
* Dimensions with pump HXLXP: 445x380x 180 mm;
* Tank diameter x H.: 340×240 mm.

Components:
* 3 housing 10″ white (2x polypropylene melt blow pre-filter 5 micron + carbon GAC cartridge);
* 1 inline Post carbon 2″x10″;
* Chrome faucet: Connection kit;
* Housing wrench + Housing 2,5″ for reverse osmosis membrane;
* Tube 1/4″.

Other names: RO-50 , RO50 , RO 50, RO_50

Colors, design elements and minor design changes can be made by the manufacturer without additional notice, without changing the main characteristics of the device.

Learn more about drinking water purification systems from our blog articles.

Please follow and like us:

Water purifier Aquaphor Topaz

This stylish attachment to the faucet has a mode switch (purify/non-purify). Through a combination of fibrous and granular adsorbents baked into carbon block it effectively removes harmful impurities from the water.

Ultracompact and affordable faucet filter for intense water purification.

Ideal product for any tap with a switch (purify/non-purify) mode. It has a compact carbon block filter, that can be attached to almost any tap and deeply purifies the water. Suitable for almost all modern kitchen taps in the market. All it requires is a standard 22 mm external or 24 mm internal thread (usually can be accessed by removing the aerator from the tip of the tap).

Faucet filters represents the easiest way to significantly improve the quality of tap water in cases when it is consumed in small quantities. Also, when it is impossible to install an under-counter system.

Filter life: 750 L / three months
Replacement cartridge: AQUAPHOR Topaz

Removes from water mm:
Chlorine: 99%
Petrochemicals: 98%
Phenol: 99%
Pesticides: 95%
Heavy metals: 98%

Overall dimensions:
– in housing diameter: 58 mm
– in width: 95 mm
– in height: 132 mm
Weight: 0.26 Kg
Resource of the replacement cartridge: 750 Litres
Recommended filtration rate: 0.3 Litres/min
Connecting dimensions: to the faucets with external (M22x1) or internal (M24x1) thread (i.e. standard 22 mm external or 24 mm internal thread).

Features

Filtration rate , L/min – 0.3
Easy to use on the road – yes
Removes chlorine – yes
Filter life, L – 750
Replacement of filter cartridges – once a year or upon reaching the filter life limit (whichever is earlier)
Filter life indicator – mechanical

In the box:
The water purifier Aquaphor Topaz
Operation manual
Packing set

Equipment

1 – Replacement filter cartridge Topaz – 1 pc
2 – Connecting unit – 1 pc

Learn more about drinking water purification systems and faucet filters from our blog articles.

Find more:
article,
YouTube video

Please follow and like us:

Tap (faucet) water purifier Aquaphor Modern (ver. 2 white)

Water purifier Aquaphor Modern (ver. 2) (white)
version 2 – Aquaphor Modern with diverter for threated faucet

The most popular faucet water filter, Modern has the greatest resource and performance. Through a combination of fibrous and granular adsorbents, Modern effectively removes harmful impurities from the water. The connection to the mixer can be temporary or permanent, which is achieved by using a nozzle with a switch. The filter can also be equipped with softening modules.

Size: 27,3 x 11,7 cm
Filter life: 4000 L
Filtration speed: 1-1.2 L

Aquaphor filter cartridges dramatically reduce the most harmful substances found in tap water. They include:
– sediment, such as rust, sand, mud, pollen;
– chlorine, chloroform, and other organic chlorine compounds;
– metals and heavy metals: iron, lead, mercury, copper, aluminum;
– petrochemicals;
– phenols;
– large bacteria.

Aquaphor faucet filters incorporate the advantages of water purification technologies with a stylish design, high efficiency, and zero installation requirements.
One can easily attach them to any kind of tap, so it is convenient to use in the office and country house. With the benefit of the same mobility as filter jugs, faucet filters provide a much longer filter life and a higher filtration rate. In total, you get 750-4000 L of fresh and clean water.
Convenient, efficient yet affordable faucet filters are popular among people who live in a rented apartment or travel a lot.

Advantages of faucet filters:
• can be attached to virtually any type of water tap;
• take little space on the kitchen counter;
• convenient and useful during trips.

Made in Europe
EAN 4744131014326

Learn more about drinking water purification systems and faucet filters from our blog articles.

Unboxing video (2 min YouTube):
https://youtu.be/KT7PrtgqW4k

Please follow and like us:

Set with 7 replacement filters (1 year economy pack) for water purifier, reverse osmosis systems 2.5 x 10 ” SL

7 filters economy replacement for Reverse Osmosis

Kit with 7 replacement filters: 2x set 3 filters 2.5 x 10 ” SL (20 micron + Carbon Block Filter + 5 micron) and Post-filter of coconut carbon 10”x2 ” 1/4 JG for water purifier, reverse osmosis systems and 10-inch under-sink filters

The gradient fabric with alternating porosity offers greater capacity and longer life.
CFB (CarbFiber Block) technology effectively removes organic substances, chlorine and pesticides.
The AQUALEN material contains silver ions in their active form.
Extended capacity up to 6 months – for each 1-3 phase filter; 12 months for post-carbon filter.
Compatible with all versions of 2.5 “x 10” containers.

Kit of 7 filters for reverse osmosis water purifier and in-line under-sink filters.

Original filter replacements for all versions with 10 “containers of any color. Specific for accumulation and continuous cycle purification systems.

1st filter: PP 20 micron sediment polypropylene cartridge, removes sand, rust, suspended particles (2 pcs).
2nd filter: CTO (Carbon Block Filter) active carbon cartridge (contains silver ions in their active form), able to remove organic substances, chlorine and pesticides. Material: compressed activated carbon CFB (CarbFilter Block technology), Aqualen (2 pcs).
3rd filter: PP polypropylene sediment cartridge 5 Micron; gradient fabric, removes sand, rust, suspended particles (2 pcs).
4th filter: Post-carbon charcoal filter 10 ” x 2 ” 1/4 JG. It is mounted after all the cleaning phases, directly before the tap for the supply of purified water (1 pc).

Ready solution for 1 year:
The recommended frequency of replacement of the filters of 1-3 stages – at least once in a 6 months.
The recommended frequency of replacement of the filter 4 (final stage) – at least once a year.

Compatible/recommended for systems: Aquaphor RO, Aquaphor Trio+, Atoll 450 – 460 – 560, Depuragua, HoneyWell and similar filtration systems.

EU product.

Please follow and like us: