Aquaphor standard faucet for Reverse osmosis and under counter water filters.
Solid modern design, JG tube connection. Hole diameter 10 mm.
Suitable for Aquaphor Morion, Crystal, other similar systems.
Softening of next-generation – valve volume and easy programming. Dayton delayed regeneration valve 859D to the mixing valve to adjust the hardness out. Electronic controller integrated into the top cover.
Pre-assembled and tested system for easier installation and start-up. Battery incorporated for dynamic memory.
Four different regeneration: Time initiated – Delayed regenerations according to selected frequency (Ex: Softener will regenerate every three days at 02:00 AM). Meter immediate – Regenerations are started after treating the programmed volume of water. Delayed regenerations – Regenerations are started after treating the programmed volume of water at the programmed hour. Mixed regeneration – Similar to delayed regeneration, but it allows to program a maximum period of time without regenerations. After this time the system will start a delayed regeneration. CE, NSF, D.M. 25, D.M. 174 Certified.
Features
* Pressure min.: 2,5 bar(2,5 kg/cm2)
* Pressure Max.: 8 bar(8 kg/cm2)
* Temperature Min: 4°C
* Temperature Max: 35°C
* Inlet/Outlet water 1″ M. (30lt.), 3/4″ M. (slim 7, slim 12, 12.5, slim 18, 18lt.)
Water hardness (limestone)
In °F (French degrees), can be measured with the drops of Titrant, important to determine the choice of the type of water softener and optimize the consumption of salt.
Ability to interchange
The hardness of the water softener is able to hold.
7 slim resin liters: 22ºHFxm3 * 12 slim resin Liters: 49ºHFxm3 * 12.5 resin Liters: 49ºHFxm3 * 18 slim resin Liters: 97ºHFxm3 * 18 resin Liters: 97ºHFxm3 * 30 resin Liters: 170ºHFxm3.
Sample calculation to determine the correct article
A water softener of 30 liters resin with a hardness of 40°F (medium-high hardness), develops 4.250 liters of softened water (170:40 = 4.250). In this case, must planning 4.2m3 in treatment capacity of the softener through the buttons on the display and provides free water softener without scale at zero French degrees.
Adjustment of the hardness out.
It’s recommended to not leak totally softened water in a residential installation. Dayton Water softeners have a residual hardness integrated regulator that allows you to precisely adjust the hardness of the treated water. To adjust the residual hardness must then carefully open the regulator MIX valve. All softeners are supplied with the valve fully closed and then will deliver water at 0°F. For water intended for human consumption, we recommend a residual hardness between 5 and 10ºF for copper pipes and between 8 and 10 º F for iron pipes. Depending on the hardness out planned, the water softener will tend to produce more water and less sweetened salt intake because the input hardness must be compensated with the output value. A water softener of 30-liter resin with a hardness of incoming 40°F and 5°F and out of hardness develops 4.857lit. of softened water (170:35=4.857). In this case, must planning 4.9 m3 in the treatment capacity of the softener through the buttons on the display. The average every person consumes 150 liters of water a day is recommended and a regeneration time scheduled every 4/5 days, then a family of 4 with water at 40°F consumes x5 days 3.000 liters, a 30 liters of water softener so with a planned regeneration even at 6 days can be installed.
Benefits and advantages
Reduction of water hardness, which is the cause of scale. ENERGY SAVING: the device prevents the formation of deposits in pipes and hydraulic lines. Greater sense of wellness during the shower. Skin soft and clean. Increased duration of appliances and boilers. COST SAVING: reduction in the use of soaps, fabric softeners, and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worry about adding salt to the water softener.
Increased sodium (for drinking water)
Most of the sodium consumed is taken with food, especially those produced by industrial processing. Salt is an excellent preservative and is used as an additive for processed products. The intake of sodium with the water we drink is relatively low compared to that which is taken with food. All softeners produce soft water using ion exchange resins in the produce softened water output of sodium ions. The recommended sodium limit for water intended for human consumption is 200 liters ppm. Depending on the concentration of sodium and water hardness, the water can have a concentration of sodium than recommended. Where this occurs, or if you need to follow a diet low in salt, it is advisable to install reverse osmosis drinking water for the home.
* Regeneration salt consumption: 3,6 kg salt.
* Water consumption for regeneration: 150lt.
* Exit treated water befor regeneration: 35°F-4,850m3, 40°F-4,250m3, 45°F-3,770m3, 50°F-3,400m3, 60°F-2,830m3.
* Working flow 1,2 m3/h
* Working flow MAX 1,8 m3/h
* Dimensions mm (WxDxH) 300 x 500 x 1045
No need to soften all the water in the house?
It makes sense to pay attention to microfiltration systems for drinking water in the kitchen with a softening cartridge. They will make the water for drinking and cooking soft, and also clean. Another way to radically improve water quality is reverse osmosis systems, which provide almost complete water purification from all soluble and insoluble impurities.Aquaphor Crystal HA for hard water – Under the Counter Water Filter Unit
https://market.promarket-eu.com/product/aquaphor-morion-dwm-101s-compact-reverse-osmosis-water-filter-system-aquaphor-dwm-101s-morion-ro-101s-sistema-filtrazione-acqua-4-fasi-a-osmosi-inversa-depuratore-acqua-reverse-osmosis-drinking-w/
Softening of next-generation valve volume and easy programming. Dayton delayed regeneration valve 859D to the mixing valve to adjust the hardness out. Bypass installation included. Electronic controller integrated into the top cover. Pre-assembled and tested system for easier installation and start-up. Battery incorporated for dynamic memory. Four different regeneration: Time initiated – Delayed regenerations according to selected frequency (Ex: Softener will regenerate every three days at 02:00 AM). Meter immediate – Regenerations are started after treating the programmed volume of water. Delayed regenerations – Regenerations are started after treating the programmed volume of water at the programmed hour. Mixed regeneration – Similar to delayed regeneration, but it allows to program a maximum period of time without regenerations. After this time the system will start a delayed regeneration. CE, NSF, D.M. 25, D.M. 174 Certified.
Features
* Pressure min.: 2,5 bar(2,5 kg/cm2)
* Pressure Max.: 8 bar(8 kg/cm2)
* Temperature Min: 4°C
* Temperature Max: 35°C
* Inlet/Outlet water 1″ M. (30lt.), 3/4″ M. (slim 7, slim 12, 12.5, slim 18, 18lt.)
Water hardness (limestone)
In °F (French degrees), can be measured with the drops of Titrant, important to determine the choice of the type of water softener and optimize the consumption of salt.
Ability to interchange
The hardness of the water softener is able to hold.
7 slim resin liters: 22ºHFxm3 * 12 slim resin Liters: 49ºHFxm3 * 12.5 resin Liters: 49ºHFxm3 * 18 slim resin Liters: 97ºHFxm3 * 18 resin Liters: 97ºHFxm3 * 30 resin Liters: 170ºHFxm3.
Sample calculation to determine the correct article
A water softener of 30 liters resin with a hardness of 40°F (medium-high hardness), develops 4.250liters of softened water (170:40 = 4.250). In this case, must planning 4.2m3 in treatment capacity of the softener through the buttons on the display and provides free water softener without scale at zero French degrees.
Adjustment of the hardness out
It’s recommended to not leak totally softened water in a residential installation. Dayton Water softeners have a residual hardness integrated regulator that allows you to precisely adjust the hardness of the treated water. To adjust the residual hardness must then carefully open the regulator MIX valve. All softeners are supplied with the valve fully closed and then will deliver water at 0°F. For water intended for human consumption, we recommend a residual hardness between 5 and 10ºF for copper pipes and between 8 and 10 º F for iron pipes. Depending on the hardness out planned, the water softener will tend to produce more water and less sweetened salt intake because the input hardness must be compensated with the output value. A water softener of 30-liter resin with a hardness of incoming 40°F and 5°F and out of hardness develops 4.857lit. of softened water (170:35=4.857). In this case, must planning 4.9 m3 in the treatment capacity of the softener through the buttons on the display. The average every person consumes 150 liters of water a day is recommended and a regeneration time scheduled every 4/5 days, then a family of 4 with water at 40°F consumes x5 days 3.000 liters, a 30 liters of water softener so with a planned regeneration even at 6 days can be installed.
Benefits and advantages
Reduction of water hardness, which is a cause of scale. ENERGY SAVING: the device prevents the formation of deposits in pipes and hydraulic lines. Greater sense of wellness during the shower. Skin soft and clean. Increased duration of appliances and boilers. COST SAVING: reduction in the use of soaps, fabric softeners, and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worry about adding salt in the water softener.
Increased sodium (for drinking water)
Most of the sodium consumed is taken with food, especially those produced by industrial processing. Salt is an excellent preservative and is used as an additive for processed products. The intake of sodium with the water we drink is relatively low compared to that which is taken with food. All softeners to produce soft water using ion exchange resins in the produce softened water output of sodium ions. The recommended sodium limit for water intended for human consumption is 200 liters ppm. Depending on the concentration of sodium and water hardness, the water can have a concentration of sodium than the recommended. Where this occurs, or if you need to follow a diet low in salt, it is advisable to install reverse osmosis drinking water for the home.
* Regeneration salt consumption: 1,00 kg/salt.
* Water consumption for regeneration: 62,5lt.
* Number treated water for regeneration, 35°F-1,400m3, 40°F-1,225m3, 45°F-1,088m3, 50°F-0,980m3, 60°F-0,816m3.
* Working flow 0,5m3/h
* Working flow MAX 0,75m3/h
* Dimensions mm (WxDxH) 300 x 500 x 580
No need to soften all the water in the house?
It makes sense to pay attention to microfiltration systems for drinking water in the kitchen with a softening cartridge. They will make the water for drinking and cooking soft, and also clean. Another way to radically improve water quality is reverse osmosis systems, which provide almost complete water purification from all soluble and insoluble impurities.Aquaphor Crystal HA for hard water – Under the Counter Water Filter Unit
https://market.promarket-eu.com/product/aquaphor-morion-dwm-101s-compact-reverse-osmosis-water-filter-system-aquaphor-dwm-101s-morion-ro-101s-sistema-filtrazione-acqua-4-fasi-a-osmosi-inversa-depuratore-acqua-reverse-osmosis-drinking-w/
ERGO 11 Volumetric Water Softener is ideal for 4/6 people.
Work without a power supply.
Designed according to the needs of installation technicians and professionals of the water treatment branch, the ERGO equipment has the most advanced technology to facilitate installation and maximize reliability. The ERGO valve, made of Noryl, has a totally hydraulic system and works without electricity. The DIRECT ACCESS system makes programming easier and guarantees correct commissioning. ERGO includes the revolutionary SAVING REGEN system. The most modern technology in water softening applied to the ERGO equipment.
Designed for the house and other commercial applications, ERGO water softeners require little space and are capable of producing quick regenerations thanks to the SPEED REGEN system. Furthermore, the ERGO HIGH FLOW system prepares the equipment to cover up to 100% of the needs of your house and other commercial installations.
Standard bypass: the bypass guarantees that the user can select the water he needs.
It also includes a hardness mixing valve.
Easy Access to the tank: the accessibility to the tank allows using salt blocks or tablets in the same equipment.
Design with an easy-to-access lid: the design of the ERGO equipment makes installation and maintenance easier to reduce costs.
Features:
– Uses less water;
– Non-electric water softener;
– High flow;
– Regeneration within 15 minutes;
– Low salt consumption.
Benefits and savings
– Protect your pipes and prevent limescale build-up, which would increase energy consumption when heating water.
– Your household appliances such as washing machines, boilers, dishwashers, etc. will last longer and consume fewer anti-limescale products.
– Protect your glassware and tableware from lime; save money by reducing anti-limescale chemical products.
– Protect toilets and taps, and have them shining as new.
– Well-being in the bathroom and the shower. Softened water is ideal for sensitive skin. Reduce costs in skin care products and moisturizers.
– Your clothes will be cleaner and have brighter colors; fabric will be softer. Save soap and fabric softeners.
Water softener parts (see image A)
1. SAVING REGEN SYSTEM: Low water and salt consumption. Environmentally safe. Standard bypass for residual hardness.
2. DIRECT ACCESS: ERGO valve without electricity. Ready to be used by simply turning a screwdriver.
3. HIGH FLOW RESIN: Ultra-fast regeneration within 15 minutes.
4. Salt valve with safety floating valve.
5. Fine Mesh compact monosphere resin bed. Great flow in little space.
6. High-quality housing made of heavy-duty injection-molded plastic.
7. Salt tablets.
8. Salt blocks.
* Resin volume: 10,5 lt.
* Working flow: 2,1 m3/h
* Working flow: 2,1 m3/h
* Exchange capacity: 23,7ºHFxm3
* Regeneration salt consumption: 0,36 Kg./sale
* Number treated water for regeneration: 15°F-1, 250m3, 20°F-0,938m3, 25°F-0,750m3, 30°F-0,625m3, 40°F-0,469m3, 50°F-0,375m3, 60°F-0,313m3, 60°F-0,268m3.
* Maximum hardness: 73°HF
* Water consumption for regeneration: 25 lt.
* Regeneration duration: 15 min.
* Temperature protection: Protection against freezing
* Temperature range: 1,7 – 45ºC
* Inlet Pressure (min./max.): 1,7 – 8 bar
* Dimensions mm (HxLxP) 608 x 500 x 297
No need to soften all the water in the house?
It makes sense to pay attention to microfiltration systems for drinking water in the kitchen with a softening cartridge. They will make the water for drinking and cooking soft, and also clean. Another way to radically improve water quality is reverse osmosis systems, which provide almost complete water purification from all soluble and insoluble impurities.Aquaphor Crystal HA for hard water – Under the Counter Water Filter Unit
https://market.promarket-eu.com/product/aquaphor-morion-dwm-101s-compact-reverse-osmosis-water-filter-system-aquaphor-dwm-101s-morion-ro-101s-sistema-filtrazione-acqua-4-fasi-a-osmosi-inversa-depuratore-acqua-reverse-osmosis-drinking-w/
An economy package comprising the set of replacement cartridges for Aquaphor Crystal A , Morion DWM Water Filters (under-counter systems) and compatible analogs.
Aquaphor K2 is designed with CarbFiber Block technology, the replacement filter uses finely divided activated coconut shell carbon. Its dense structure allows it to effectively remove organic impurities and active chlorine from the water. It filters particles down to 3 microns in size.
Containing modified selective chelating groups, the ion-exchange Aqualen fibers deeply and irreversibly purify the water from heavy metals.
The replacement filter contains silver in its active ionic form.
Aquaphor K5 sediment filter cartridge pre-filtration for Aquaphor Morion, Crystal, Solo. Replacement sediment filter manufactured from 100% Polypropylene. It is used to retain dirt and other sediment particles 5 microns or larger in the incoming water.
Filtering type: mechanical pre-filter
Weight: not more than 0.7 kg
Dimensions: 8 cm x 31 cm
Maximum operating water pressure: 0.63 MPa (6.5 at)
Water temperature: +5 … + 38 ° С
Removes contaminants down to 5 μm
An economy package comprising the set of replacement cartridges for Aquaphor Crystal Water Filter (under-counter system) and compatible analogs.
Aquaphor K2 designed with CarbFiber Block technology, the replacement filter uses finely divided activated coconut shell carbon. Its dense structure allows it to effectively remove organic impurities and active chlorine from the water. It filters particles down to 3 microns in size.
Containing modified selective chelating groups, the ion-exchange Aqualen fibers deeply and irreversibly purify the water from heavy metals.
The replacement filter contains silver in its active ionic form.
Aquaphor K5 sediment filter cartridge pre-filtration for Aquaphor Morion, Crystal, Solo. Replacement sediment filter manufactured from 100% Polypropylene. It is used to retain dirt and other sediment particles 5 microns or larger in the incoming water.
Filtering type: mechanical pre-filter
Weight: not more than 0.7 kg
Dimensions: 8 cm x 31 cm
Maximum operating water pressure: 0.63 MPa (6.5 at)
Water temperature: +5 … + 38 ° С
Removes contaminants down to 5 μm
RO-31 reverse osmosis system offers a unique way of making pure and soft drinking water. Replacing a traditional pressurized storage tank for clean water with a water jug ensures high-quality purification, freshness, and ease of use. Clean water is produced in front of your eyes.
Advantages of RO-31:
• occupies little space above and under the sink.
• extremely thorough water purification.
• optimized mineral balance.
• operates at low pressure.
• can use 2nd jug for your convenience, e.g. to store cooled water in the refrigerator.
This product is currently available through this module; Please fill out the form below, and we will email you a proforma invoice with all the payment and delivery conditions (which you can freely accept or not):
A reverse osmosis filter consists of four stages of water purification. The filter integrates the best technologies and developments of the AQUAPHOR company, such as the unique ion-exchange fiber Aqualen, which has an increased sorption surface. In comparison with other filters, the DVS technology bactericidal properties are greatly increased. The DWM-312-12M-S1 is very compact and contains a jug instead of a tank. The jug is filled automatically.
The filters work at a low pressure of the water supply system from 1.5 atmospheres, are easy to maintain due to easily removable cartridges, and saturates the water with useful minerals. With this system, you get crystal clear water, balanced in composition with microelements.
Advantages:
– compact size;
– unique patented cartridges;
– easily removable replaceable modules;
– high system performance;
– lack of scale;
– production certification;
– work at low pressure;
– purified water mineralization.
The principle of operation of Aquaphor DWM-312-12M-S1:
Connection diagram Aquaphor DWM-312-12M-S1:
Working pressure, atm 1.5 – 6
Case material plastic
Mounting plate material Plastic
Flask type easily removable
Placement under the sink, on the table
Dimensions (w / h / d) mm 265x100x365
Filtration type reverse osmosis
Working temperature, оС 5 – 40
Productivity, l / day 380
Special differences without tank
Number of cleaning stages 4
Premium filter class
Mineralizer cleaning steps
Body type monoblock
Membrane RO100S (100 GPD)
Warranty, months 12 months
White color
EAN: 4744131013718
The service life of the filter cartridges and elements:
mineralizer, K5, K2: 6 months*
membrane: 1.5-2 years. **
* Depending on the amount of impurities in the water, the service life (resource) of the water treatment cartridges may vary (may be shorter or longer than the standard service life).
** Service life of membrane element is directly dependent on the operation of pre-treatment cartridges.
Please replace filter cartridges timely
Optional: A replacement filter is available in our online store
Undercounter filters K2
Undercounter filters K5
The water conditioning cartridge
membrane
The modern, compact filter system Aquaphor Crystal series not only perfectly and quickly purifies water, but also (thanks to using innovative technologies) is the most convenient and easiest to use of the other under-counter flow filters.
Replacement filters last much longer than normal systems due to the increased amount of adsorbent. Crystal also outperforms other brands because it is much easier to replace filters due to the special fasteners which require minimal time and effort (click-and-turn technology). In addition, filters are replaced with housing that prevents contamination.
Features & Benefits:
Crystal makes your tap water safe to drink. It reduces the presence of harmful substances and removes particles up to 0.1 micron. Crystal is suitable for allergy sufferers, children and elderly persons, and people with delicate digestive and immune systems. Extremely compact and easy to use, this drinking water filtration system is suitable for any family or home.
Spare cartridge set for a water filter:
– K5 – sediment filter cartridge for pre-filtration. Replacement sediment filter manufactured from 100% Polypropylene. It is used to retain dirt and other sediment particles 5 microns or larger in the incoming water.
– K2 – absorption treatment and purification carbon-fiber-block filter with AQUALEN ion-exchange fiber. Reduces organic and chlorine impurities in water. Reduces the formation of suspended particles and 3 micron or larger sediments in the water inlet. AQUALEN ion-exchange fiber with selective modifications chelated groups effectively reduces heavy metals from water. Contains silver in active ionic form.
– K7 – Water purification and carbon-fiber-block finishing filter with AQUALEN ion-exchange fiber. AQUALEN modified fiber distributes water flows in a Super Dense filter, in order to achieve maximum purification. Reduces the formation of suspended particles and sediments 0.8 microns or larger in the water inlet. Contains silver in activated ionic form.
Technical specification:
Filter life: 6000L
Replacement of cartridge: every 12 months (depends also on the source water quality)
Filtration speed: 2.5 L/min
Dimensions: 26.0 x 9.0 x 35.0 cm
Weight: not more than 3 kg
Replacement cartridges: K5, K3, K7
Maximum operating water pressure: 0.63 MPa (6.5 at)
Water temperature: +5 … + 38 ° С
Replacements:
Set of replacement cartridges Aquaphor K2-K5
You can easily order full or partial replacement sets (“big service” or “small service”), as well as one filtering cartridge that you need.
Set of replacement cartridges Aquaphor K5-K2-K7 (for Aquaphor Crystal-A Water Filter)
Replacement filtering cartridge Aquaphor K7 for undercounter filters Crystal, Morion
Manufactured in EU
EAN 4744131014098
Aquaphor Osmo-50 Classic Trio is not available at this moment.
There are some alternatives for you meanwhile.
 |
Direct flow reverse osmosis system with 4 stages of purification to remove chlorine, minerals, heavy metals, pesticides, organic substances, bacteria, viruses. |
|
|
A reverse osmosis system with a time-proven, traditional configuration. Removes all types of water contaminants including hardness, nitrates, nitrites, bacteria, viruses, and traces of pharmaceuticals. |
|
|
Morion Filtration System provides the same high quality of purified water as premium bottled water. |
A reverse osmosis system with a time-proven, traditional configuration. Removes all types of water
contaminants including hardness, bacteria, viruses, nitrates, nitrites, traces of pharmaceuticals and any
particles down to 0.0005 microns in size.
Equipped with a 10-liter storage tank and a separate faucet for clean water.
Requires tap pressure of at least 3 bar.
Advantages of Aquaphor Osmo Classic:
• effective pre-filtration;
• durable housing, designed as a single unit;
• classic 10” filter cartridges;
• space-saving under sink placement options: housing can be hanged on the wall;
Set includes filtration cartridges: PP20, B510-03, ULP-50 RO membrane, PP5
Overall dimensions (length × height × width): 390 × 420 × 190 mm
Overall dimensions of the storage tank (height × diameter): 360 × 270 mm
Working pressure of water: 0.34–0.63 MPa (3.5–6.5 bar)
Water temperature: from +5 to +38 С
Maximum productivity (at a water temperature of +25 С and a pressure of 0.39 MPa (4 at)): 7.8 l / h
The ratio of purified water and water entering the drainage: 1: 4–1: 6
Weight, no more: 12 kg
