The Trio Norm water filter uses a three-stage filtration system:
• The first stage: Polypropylene pre-filter for reducing sand, rust, silt, and other sediment in water.
Effectively reduce microparticles down to 5 microns in size. Gradient texture increases dirt retention capacity and filter life. Require replacement at least once every 6 months.
• The second stage: B510-02 replacement filter – deep purification of water designed with CarbFiber Block technology. This replacement filter uses finely divided activated coconut shell carbon. Its dense structure allows it to effectively remove organic impurities and active chlorine from the water.
Containing modified selective chelating groups, the ion-exchange Aqualen fibers deeply and irreversibly purify the water from heavy metals. It does not affect water hardness or disinfect the water.
• The third stage: B510-07 replacement filter uses an ultra-dense fibrous carbon block made from powdered activated coconut shell carbon. It removes the residual concentrations of organic contaminants and heavy metals. It filters particles down to 1 micron in size.
Modified Aqualen fibers distribute the water flow in the ultra-dense filter medium allowing for the best purification. The replacement filter contains silver in its active ionic form.
Technical data
Filtration rate , L/min – 2.0
Drinking water tap – Yes
Efficiency, L – 6,000*
Removes chlorine – Yes
Replacement of filter elements – once a year or after cartridge replacement capacity (whichever comes first)
System type – sorption
Takes up little space under the sink – Yes
Connection hoses: 1/4 JG
Filters: drop-in 2.5 x 10 inch Slim Line (SL)
*The resource for the set of replacement cartridges is established (set) for water filtration, which corresponds in force
to sanitary norms
99,9% bacteria reduction, removes Fluoride, heavy metals, pesticides, etc.;
No limescale;
Fits in any kitchen, thanks to its small dimensions;
No electricity is needed;
Enriches filtered water with healthy minerals: Mg+, Ca+ (using special cartridges);
Morion DWM-102S (RO-102s) Filtration System provides the same high-quality purified water as premium bottled water. Reverse osmosis removes virtually all impurities from the water, including hardness, chlorine, lead, other metals, bacteria, and many others. For drinking water and aquarium water. Morion water becomes better for your health, has an exceptional taste, and is soft – no more limescale on your silverware.
Discover the true taste of your coffee and tea.
Morion can be easily used with ice and coffee makers and refrigerators.
ULTRA POST-FILTRATION: Morion is equipped with a compound bactericidal post-filtration cartridge that blocks all impurities up to 0.1 micron (with optional filter K7BM). Your water is odorless and perfectly safe even for children and allergies suffer. Healthy and clean water directly from the tap.
EASY REPLACEMENT OF THE CARTRIDGE with Click-and-Turn System (cartridges K5 – K2 – RO100S (K100S)- K7M). Clean and safe service.
Extreme compactness: Morion has a 50% smaller footprint compared to traditional RO systems, thanks to the integrated storage tank. It is compact enough to fit under the sink.
Dimensions: 42 x 19 x 37 cm (including the water tank).
Minimum main operating pressure: 1.86 bar (under normal tap water conditions).
Clean water storage tank: 5 liters.
pH after DWM: 6-7
MPN: E024S.
INSTRUCTION MANUAL: EN, IT.
99,9% bacteria reduction, removes Fluoride, heavy metals, pesticides, etc.;
No limescale;
Fits in any kitchen, thanks to its small dimensions;
No electricity is needed;
Enriches filtered water with healthy minerals: Mg+, Ca+ (using special cartridges);
Morion DWM-101S-EU (RO-101s-EU) Filtration System provides the same high-quality purified water as premium bottled water. Reverse osmosis removes virtually all impurities from the water, including hardness, chlorine, lead, other metals, bacteria, and many others. For drinking water and aquarium water. Morion water becomes better for your health, has an exceptional taste, and is soft – no more limescale on your silverware.
Discover the true taste of your coffee and tea.
Morion can be easily used with ice and coffee makers and refrigerators.
ULTRA POST-FILTRATION: Morion is equipped with a compound bactericidal post-filtration cartridge that blocks all impurities up to 0.1 micron. Your water is odorless and perfectly safe even for children and allergies suffer. Healthy and clean water directly from the tap.
EASY REPLACEMENT OF THE CARTRIDGE with Click-and-Turn System (cartridges K1-K2-RO50s-K7BM). Clean and safe service.
Extreme compactness: Morion has a 50% smaller footprint compared to traditional RO systems, thanks to the integrated storage tank. It is compact enough to fit under the sink.
Dimensions: 42 x 19 x 37 cm (including the water tank).
Minimum main operating pressure: 1.86 bar (under normal tap water conditions).
* details may vary from model to model (version)
The manufacturer reserves the right to change the construction, design and configuration of the product and packaging without further notice, while maintaining the basic consumer characteristics and parameters of the product.
RO 50 reverse osmosis with a tank with pump and UV lamp. New domestic reverse osmosis range with pressurized 11 l. accumulator tank. The equipment provides 50 GPD and a booster pump.
The prefiltration is made through 2 melt-blown polypropylene prefilters from 5 microns and a carbon GAC drop-in cartridge. The water then passes through lonicore membrane, which carries out the reverse osmosis process, then the water line filter re-filters the water.
The system is complete with an installation kit and a separate faucet for depurated water.
Features:
* Input temperature (MAX.-MIN.): 5°C-38 C:
* Input TDS (MAX.): 2.000ppm;
* With pump input pressure (MAX.-MIN.): 1-4 bar:
* Nominal production: 150 It./day (50GPD lonicore USmotic TFC):
*Nominal production: 245 It./day (75GPD lonicore USmotic TFC):
* Membrane: 1×2012 50GPD lonicore USmotic TFC
* Max. water storage: 11lt. (precharged tank 5-8 PSl or 0,35-0.55 bar):
* Power supply: 220-240V 50HZ 24W. – Italian 3-plug L type:
* Electrical pump: input 100-240V. 50/60HZ. output 24 Vdc 2.5A:
* Dimensions without pump HXLXP: 385x390x155 mm;
* Dimensions with pump HXLXP: 445x380x 180 mm;
* Tank diameter x H.: 340×240 mm.
An economy package comprising the set of replacement cartridges for Aquaphor Morion Water Filter (under-counter system) and compatible analogs.
Undercounter filter K2:
Aquaphor K2 designed with CarbFiber Block technology, the replacement filter uses finely divided activated coconut shell carbon. Its dense structure allows it to effectively remove organic impurities and active chlorine from the water. It filters particles down to 3 microns in size.
Containing modified selective chelating groups, the ion-exchange Aqualen fibers deeply and irreversibly purify the water from heavy metals.
The replacement filter contains silver in its active ionic form.
Undercounter filter K5:
Aquaphor K5 sediment filter cartridge pre-filtration for Aquaphor Morion, Crystal, Solo. Replacement sediment filter manufactured from 100% Polypropylene. It is used to retain dirt and other sediment particles 5 microns or larger in the incoming water.
Filtering type: mechanical pre-filter
Weight: not more than 0.7 kg
Dimensions: 8 cm x 31 cm
Maximum operating water pressure: 0.63 MPa (6.5 at)
Water temperature: +5 … + 38 ° С
Removes contaminants down to 5 μm
Reverse osmosis membrane
RO-50s – Reverse osmosis membrane provides ultrafiltration of all contaminants including cysts, bacteria and viruses.
It also removes water hardness from any initial level.
This membrane has a performance of 7.8 liters per hour (50 Gallons/Day).
Fast change Push-and-turn technology.
Reduces bacteria: 99.9%
Replace the membrane cartridge at least once a year. **
** Service life of the membrane element is directly dependent on the operation of pre-treatment cartridges. Please replace filter cartridges timely
Attention:
Be sure that you are choosing the correct membrane type:
this set fits Morion DWM-101s (membrane RO-50s without bottom drain tube).
If you have an older version Morion DWM-101 (membrane RO-50 with bottom drain tube), you must choose set K2-K5-RO50-K7M.
You can see the difference in the picture. Please refer also to other photos and technical documentation.
Aquaphor Morion DWM 101s vs DWM 101
Undercounter filter K7M:
Aquaphor K7M is used as the final step in Aquaphor reverse osmosis purifiers. It provides water conditioning and remineralization for better taste and recommended the electrolyte balance of the drinking water.
Recommended for Morion DWM-101s. Compatible also with similar filters with Click-and-Turn Technology of replacement.
Filtering type: water conditioning and mineralization
Weight: not more than 1 kg
Dimensions: 8.1 cm x 31 cm
Maximum operating water pressure: 0.63 MPa (6.5 at)
Water temperature: +5 … + 38 ° С
An economy package comprising the set of replacement cartridges for Aquaphor Morion DWM-101 Water Filter (under-counter system) and compatible analogs (Big service set). If you have a new version Morion DWM-101s (RO-50s membrane without bottom drain tube), you have to choose the K2-K5-RO50s-K7M set.
Undercounter filter K2:
Aquaphor K2 designed with CarbFiber Block technology, the replacement filter uses finely divided activated coconut shell carbon. Its dense structure allows it to effectively remove organic impurities and active chlorine from the water. It filters particles down to 3 microns in size.
Containing modified selective chelating groups, the ion-exchange Aqualen fibers deeply and irreversibly purify the water from heavy metals.
The replacement filter contains silver in its active ionic form.
Undercounter filter K5:
Aquaphor K5 sediment filter cartridge pre-filtration for Aquaphor Morion, Crystal, Solo. Replacement sediment filter manufactured from 100% Polypropylene. It is used to retain dirt and other sediment particles 5 microns or larger in the incoming water.
Filtering type: mechanical pre-filter
Weight: not more than 0.7 kg
Dimensions: 8 cm x 31 cm
Maximum operating water pressure: 0.63 MPa (6.5 at)
Water temperature: +5 … + 38 ° С
Removes contaminants down to 5 μm
Reverse osmosis membrane
RO-50 – Reverse osmosis membrane provides ultrafiltration of all contaminants including cysts, bacteria and viruses.
It also removes water hardness from any initial level.
This membrane has a performance of 7.8 liters per hour (50 Gallons/Day).
Fast change Push-and-turn technology.
Reduces bacteria: 99.9%
Caution: Make sure you choose the correct membrane type: this set fits an older version Morion DWM-101 (RO-50 membrane with bottom drain tube). If you have a new version Morion DWM-101s (RO-50s membrane without bottom drain tube), you have to choose the K2-K5-RO50s-K7M set. You can see the difference in the photo. Please also refer to other photos and technical documentation.
Replace the membrane cartridge at least once a year. **
** Service life of the membrane element is directly dependent on the operation of pre-treatment cartridges. Please replace filter cartridges timely
Undercounter filter K7M:
Aquaphor K7M is used as the final step in Aquaphor reverse osmosis purifiers. It provides water conditioning and remineralization for better taste and recommended the electrolyte balance of the drinking water.
Recommended for Morion DWM-101, for Morion DWM-101s. Compatible also with similar filters with Click-and-Turn Technology of replacement.
Filtering type: water conditioning and mineralization
Weight: not more than 1 kg
Dimensions: 8.1 cm x 31 cm
Maximum operating water pressure: 0.63 MPa (6.5 at)
Water temperature: +5 … + 38 ° С
Direct flow reverse osmosis system with 4 stages of purification to remove up to 99.9% of chlorine, minerals, heavy metals, pesticides, organic substances, bacteria, and viruses.
Reinforced chassis with rack bracket in high-quality metal with stainless steel screws, patented and leak-resistant high-pressure switches, installation kit with tubes and 1-way Long-reach faucet with metal handle included. The system supplies ambient temperature osmotic water to drink and cook with maximum security. The certified product according to UNE149101, Italian Decree 25/2012 and 174/2004.
The benefits of RO C500:
– Effective pre-filtration.
– Sturdy filter housing base that can be surface-mounted or hung on the wall.
– Classic, inexpensive and widely used 10″ filter cartridges, which are manufactured by a multitude of companies around the world.
– Low price with excellent quality and European assembly (within 500 euros).
– The integrated pump enables the system to be used when the water supply pressure is low and accelerates the filtration process. Thanks to the pressure booster pump, the system can be operated at a rather low line pressure of 1 atm. The pump is equipped with an electrical adapter and works with a safety voltage of 24 or 36 V.
– If required, the system may be easily supplemented with a UV lamp and TDS controller. If needed, simply increase the filter capacity by installing a larger membrane or a second parallel membrane.
Specifications*:
* Flow rate: 400GPD (65lt./h)
* Booster pump: RO500 – 24/36V. – 3A
* Membranes style: Dry
* Membranes cleaning: Manual flushing
* Maximum inlet salinity: 1.500ppm.
* TDS regulator in accordance with your taste (mineral salts outgoing)
* Pressure gauge: Outlet booster pump pressure
* Working pressure: 0,3~0,6MPa (3~6 bar)
* Working temperature: 35.6 – 104°F / 2 – 40°C.
* Power supply: 100-240 Vac 50/60 Hz: 36V. 3A
* Rating power: 54W.
* Average NaCl rejection: >95%
* Recovery rate: >25%
* Dimensions(mm): H470 x L360 x P210
* Color: white, black
How works the reverse osmosis (RO):
Reverse osmosis is a traditional, time-tested water purification method. It removes all types of water contaminants including hardness, bacteria, viruses, nitrates, nitrites, traces of pharmaceuticals, and any particles down to 0.0005 microns. Reverse osmosis filters have the most perfect degree of purification. They filter water slowly but retain not only common impurities but also impurities and toxins dissolved in water. Moreover, the membrane of the reverse osmosis filter traps most biological impurities, such as cholera bacteria, hepatitis viruses, and the Sars-Cov-2 coronavirus. At the exit of the reverse osmosis filter, we get the purest water without foreign smells and tastes. This water is better for your health, it has exceptional taste, clarity, and softness.
How works the reverse osmosis (RO) membrane
However Reverse osmosis system is not a device that magically makes any water drinkable (non-drinkable water into drinkable water) and it works only if it’s installed on water that complies with the basic norms, e.g. municipal potable water or well water that was previously made drinkable with adequate and effective systems, preventively studied and personalized for that kind of water. Do not use the system where the water is microbiologically dangerous or of unknown quality without adequate disinfection before and after the system. All systems must be installed according to the manufacturer’s instructions. In case of potable inlet water of bad quality, it’s recommended to close all the outgoing mineral salts regulator (TDS) and to mount, as the last stage, a remineralizing filter that stabilizes the PH.
RO 50 reverse osmosis with a tank, with a pump. New domestic reverse osmosis product line with pressurized 11 lts. accumulator tank. The equipment provides 50 GPD and a booster pump.
The prefiltration is made through 2 melt-blown polypropylene prefilters from 5 microns and a carbon GAC drop-in cartridge. The water then passes through the lonicore membrane, which carries out the reverse osmosis process, then the water line filter re-filters the water.
The system is complete with an installation kit and a separate faucet for clean water.
Features:
* Input temperature (MAX.-MIN.): 5°C-38 C:
* Input TDS (MAX.): 2.000ppm;
* With pump input pressure (MAX.-MIN.): 1-4 bar:
* Nominal production: 150 It./day (50GPD lonicore USmotic TFC):
*Nominal production: 245 It./day (75GPD lonicore USmotic TFC):
* Membrane: 1×2012 50GPD lonicore USmotic TFC
* Max. water storage: 11lt. (precharged tank 5-8 PSl or 0,35-0.55 bar):
*Power supply: 220-240V 50HZ 24W. – Italian 3-plug L type:
* Electrical pump: input 100-240V. 50/60HZ. output 24 Vdc 2.5A:
* Dimensions without pump HXLXP: 385x390x155 mm;
* Dimensions with pump HXLXP: 445x380x 180 mm;
* Tank diameter x H.: 340×240 mm.
Colors, design elements and minor design changes can be made by the manufacturer without additional notice, without changing the main characteristics of the device.
Economy package comprising the set of replacement cartridges for Aquaphor Crystal Eco Water Filter (under-counter system) and compatible analogs.
Consists of: K3– Replacement filter for primary purification of drinking water. Reduces all common impurities including chlorine, lead, bacteria and solid particles sized down to 10μm.
EAN 4744131010861
K7B – Replacement filter for micro filtration of water. Removes all common impurities including chlorine, lead, bacteria, cysts and solid particles of 0.1μm (micron) and more. It includes carbon block (CFB) and hollow fiber membrane (HF). Replaced as a piece with the casing, which provides additional protection against bacteria.
EAN 4744131012001
K7 – Replacement filter for final stage of drinking water purification. Removes all common impurities including chlorine, lead, bacteria and solid particles sized down to 0.8μm
EAN 4744131010915
The cartridges are easily replaceable: press the button; unscrew the old cartridge and turn the new cartridge until you hear a “click”.
Ultrafine cleaning. Complete removal of bacteria and viruses Removing soluble salts. Softening of the water.
The original DOW membrane is Filmtec with a hologram and serial number. Made in the USA.
Fits a wide range of standard reverse osmosis systems: Aquaphor RO, Aquaphor Trio +, Atoll 450 – 460 – 560, Depuragua, Geyser, HoneyWell and similar.
Productivity 7.9 liters per hour (about 189 liters per day) – optimal for home use or a small office.
The degree of purification – at least 98% of all contaminants remaining after the pre-treatment steps
Reverse osmosis membrane Filmtec are the most reliable industry for home drinking water.
Advanced membrane technology and automated in filmtec reverse fabric osmosis membranes enable these elements to offer consistent performance for all customers.
The filmtec tw30 – 1812 – 50 reverse osmosis membrane element is NSF / ANSI standard 58 listed.
Filmtec home drinking water elements are equal to 50 psi and purify the water about 20% more than competitive components up to 60 psi.
Dimensions: 4.4 cm x 29.8 cm.
Maximum work temperature: 45 ° C.
Flow rate (GPD): 50 psig 50 GPD (permeated flows for individual elements may vary +/- 20%).
Maximum operating pressure: 300 psig (21 bar).
Maximum supply 7.9 liters per hour (approximately 189 liters per day).
Free chlorine tolerance: continuous operation: 2 – 11. (maximum continuous operating temperature above pH 10 is 35 ° C. PH short-term cleaning (30 min.): 1 – 12.
The recommended frequency of replacement (when using after 3-stage prefilters) at least once in 24-30 months.
Note: different light and screen may cause the color of the item in the photo a little different from the real one.
The warranty does not cover spare parts and cartridges, does not cover any damage to third parties. If you have any complaints about the quality of the filter, contact the seller or the manufacturer. Complaints regarding the damaged water purifier (in any way), or without verification by the seller, will not be accepted.
Use in accordance with the instructions for your reverse osmosis system. Only install after a system of preliminary filtration of particles no more than 1 micron.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
You can find more information on cookies and methods of disabling in the Privacy Policy.Allow all cookiesAllow only functional cookiesPrivacy policy
